Efficiency of magnesium hydroxide as engineering seal in the geological sequestration of CO2
Injection of CO2 at depth will cause the acidification of groundwater. As a preliminary study for the potential use of MgO as an alternative to Portland cement in injection wells, MgO carbonation has been studied by means of stirred batch experiments under subcritic (pCO(2) of 10 and 50 bar and T of...
| Autores: | , , , , |
|---|---|
| Tipo de recurso: | artículo |
| Estado: | Versión aceptada para publicación |
| Fecha de publicación: | 2016 |
| País: | España |
| Institución: | Varias* (Consorci de Biblioteques Universitáries de Catalunya, Centre de Serveis Científics i Acadèmics de Catalunya) |
| Repositorio: | Recercat. Dipósit de la Recerca de Catalunya |
| OAI Identifier: | oai:recercat.cat:2445/127917 |
| Acceso en línea: | https://hdl.handle.net/2445/127917 |
| Access Level: | acceso abierto |
| Palabra clave: | Captura i emmagatzematge de diòxid de carboni Carbon sequestration |
| Sumario: | Injection of CO2 at depth will cause the acidification of groundwater. As a preliminary study for the potential use of MgO as an alternative to Portland cement in injection wells, MgO carbonation has been studied by means of stirred batch experiments under subcritic (pCO(2) of 10 and 50 bar and T of 25, 70 and 90 degrees C) and supercritic (pCO(2) of 74 bar and T of 70 and 90 degrees C) CO2 conditions.; Magnesium oxide reacts with CO2-containing and Ca-rich water nearly equilibrated with respect to calcite. MgO quickly hydrates to brucite (Mg(OH)(2)) which dissolves causing the precipitation of magnesium carbonate phases. Precipitation of these secondary phases (magnesite and/or metastable phases such as nesquehonite (MgCO3 3H(2)O) or hydromagnesite (Mg-5(CO3)(4)(OH)(2) 4(H2O)) depends on pCO(2), temperature and solid/water content. In a constant solid/water ratio, the precipitation of the non-hydrated Mg carbonate is favored by increasing temperature and pCO(2).; The experimental variation of Mg and Ca concentrations and pH over time at the different temperatures and pCO(2) has been simulated using the CrunchFlow reactive transport code. Simulations reproduce the experimental evolution of the aqueous concentrations and indicate a decrease in porosity when increasing temperature and pCO(2). This decrease in porosity would be beneficial for the sealing properties of the cement. These results have been used in the simulation of an application case with a deep borehole surrounded by MgO cement at 90 degrees C. |
|---|