Influence of the microstructure on corrosion induced damage of WC-Co cemented carbides

The main goal of the present work is to study the influence of the microstructure on the corrosion behavior of cemented carbides WC-Co in two corrosive media. Corrosion kinetics were determined by immersion tests while the electrochemical evolution of the Surface was analyzed using impedance testing...

Descripción completa

Detalles Bibliográficos
Autores: Fargas Ribas, Gemma|||0000-0002-5106-1220, Sosa, D., Tarragó, José María, Tarrés Puit, Elena, Fair, Jonathan, Llanes Pitarch, Luis Miguel|||0000-0003-1054-1073
Tipo de recurso: artículo
Fecha de publicación:2020
País:España
Institución:Universitat Politècnica de Catalunya (UPC)
Repositorio:UPCommons. Portal del coneixement obert de la UPC
Idioma:inglés
OAI Identifier:oai:upcommons.upc.edu:2117/329263
Acceso en línea:https://hdl.handle.net/2117/329263
https://dx.doi.org/10.1080/00325899.2020.1768354
Access Level:acceso abierto
Palabra clave:Carbides
Corrosion and anti-corrosives
Cemented carbides
Corrosion kinetics
Sea water
Mine water
Carburs
Corrosió i anticorrosius
Àrees temàtiques de la UPC::Enginyeria dels materials::Metal·lúrgia
Descripción
Sumario:The main goal of the present work is to study the influence of the microstructure on the corrosion behavior of cemented carbides WC-Co in two corrosive media. Corrosion kinetics were determined by immersion tests while the electrochemical evolution of the Surface was analyzed using impedance testing. Damage tolerance to corrosion was evaluated by assessing fracture strength on specimens previously subjected to corrosion. Results pointed out that for both grades the corrosion rate was higher in seawater, being more significant for the grade with a medium grain size. The corrosion phenomenon that took place in both media was caused by the oxidation reaction of cobalt. In seawater, the polarization resistance decreased for both grades whereas in mine water increased, due to the formation of a layer of corrosion products, which slowed down the cobalt dissolution process in Surface. In both media, a greater strength loss of the ultrafine grades was evidenced.