The effect of steady and cyclic environmental conditions on the tensile behaviour of a structural adhesive under sustained loading
Structural adhesives are commonly used to bond Fibre Reinforced Polymer (FRP) materials to Reinforced Concrete (RC) structures so they can withstand service conditions. This paper presents an experimental study on the combined effect of sustained loading and service steady and cyclic temperatures on...
| Autores: | , , , , |
|---|---|
| Tipo de recurso: | artículo |
| Estado: | Versión publicada |
| Fecha de publicación: | 2022 |
| País: | España |
| Institución: | Varias* (Consorci de Biblioteques Universitáries de Catalunya, Centre de Serveis Científics i Acadèmics de Catalunya) |
| Repositorio: | Recercat. Dipósit de la Recerca de Catalunya |
| OAI Identifier: | oai:recercat.cat:10256/20699 |
| Acceso en línea: | http://hdl.handle.net/10256/20699 |
| Access Level: | acceso abierto |
| Palabra clave: | Resines epoxídiques Epoxy resins Assaigs de materials Materials -- Testing |
| Sumario: | Structural adhesives are commonly used to bond Fibre Reinforced Polymer (FRP) materials to Reinforced Concrete (RC) structures so they can withstand service conditions. This paper presents an experimental study on the combined effect of sustained loading and service steady and cyclic temperatures on the thermophysical and mechanical properties of an epoxy adhesive. Four experimental series consisting of nine adhesive tensile dog-bone specimens were tested under sustained loading and temperatures ranging between 18 °C and 43 °C for a duration of 1000 h. Moreover, the residual properties of the adhesive have been evaluated through instantaneous tensile tests and Differential Scanning Calorimetry (DSC) after sustained loading tests. Results showed a significant increase in strain with time, a reduction in the mechanical properties, and an increase in the glass transition temperature and curing degree of the adhesive after the exposure at service conditions and sustained loading. From this work it could be concluded that the combination of sustained loading and service temperatures have a significant effect on the creep behaviour of the adhesive, and cyclic temperatures have a greater effect on the adhesive even though the average temperature is below the steady temperature. |
|---|