Optically Feeding 1.75 W With 100 m MMF in Efficient C-RAN Front-Hauls With Sleep Modes

Using bundles of multimode optical fibers (MMF) as part of the 5G centralized radio access networks front-haul solutions for optically powering of low power consumption Remote Radio Heads (RRH) is proposed and experimentally demonstrated with 100 m of 200 μm core diameter MMF. From the 34.85 W elect...

Descripción completa

Detalles Bibliográficos
Autores: López Cardona, Juan Dayron, Contreras Lallana, Pedro, Altuna, Ruben, Fresno Hernández, Alicia, Barreiro, Xabier, Vázquez García, Carmen
Tipo de recurso: artículo
Fecha de publicación:2021
País:España
Institución:Universidad Rey Juan Carlos
Repositorio:BURJC-Digital. Repositorio Institucional de la Universidad Rey Juan Carlos
OAI Identifier:oai:burjcdigital.urjc.es:10115/29065
Acceso en línea:https://hdl.handle.net/10115/29065
Access Level:acceso abierto
Palabra clave:Optical fibers
Optical fiber sensors
Optical fiber amplifiers
Optical amplifiers
Passive optical networks
Heating systems
Biomedical optical imaging
Descripción
Sumario:Using bundles of multimode optical fibers (MMF) as part of the 5G centralized radio access networks front-haul solutions for optically powering of low power consumption Remote Radio Heads (RRH) is proposed and experimentally demonstrated with 100 m of 200 μm core diameter MMF. From the 34.85 W electrical power provided to the system, 1.748 W are delivered to the load, giving an overall 5% efficiency, being the temperature controller of the High Power Lasers the most critical element. If intermediates results are considered, the efficiency from input optical power to electrical power after the PV cells is 43.4%. The RRH manages 2.34 W for control, battery charge, communications and the load operation. The system includes a low power bidirectional control channel that provides the capability of enabling different sleep modes and sending information about the status of the battery and sensing elements at RRH. The RRH has a minimum power consumption of 3.15 mW. Optimized design of different elements of the system are included. The system is tested by feeding a RF power amplifier at the RRH; providing a stable power supply and EVM performance below 17.8% with QPSK on a 20 GHz RF carrier.