VOF Simulation of The Cavitating Flow in High Pressure GDI Injectors
[EN] The paper describes the development in the OpenFOAM® technology of a dynamic multiphase Volume-of-Fluid (VoF) solver, supporting mesh handling with topological changes, that has been used for the study of the physics of the primary jet breakup and of the flow disturbance induced by the nozzle g...
| Autores: | , , , , |
|---|---|
| Tipo de recurso: | capítulo de libro |
| Fecha de publicación: | 2017 |
| País: | España |
| Institución: | Universitat Politècnica de València (UPV) |
| Repositorio: | RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia |
| Idioma: | inglés |
| OAI Identifier: | oai:riunet.upv.es:10251/99833 |
| Acceso en línea: | https://riunet.upv.es/handle/10251/99833 |
| Access Level: | acceso abierto |
| Palabra clave: | Volume-of-fluid GDI injectors Topologically changing mesh Hybrid RANS/LES Cavitation OpenFOAM® |
| Sumario: | [EN] The paper describes the development in the OpenFOAM® technology of a dynamic multiphase Volume-of-Fluid (VoF) solver, supporting mesh handling with topological changes, that has been used for the study of the physics of the primary jet breakup and of the flow disturbance induced by the nozzle geometry during the injector opening event in high-pressure Gasoline Direct Injection (GDI) engines. Turbulence modeling based on a scale-resolving approach has been applied, while phase change of fuel is accounted by means of a cavitation model that has been coupled with the VOF solver. Simulations have been carried out on a 6-hole prototype injector, especially developed for investigations in the framework of the collaborative project FUI MAGIE and provided by Continental Automotive SAS. Special attention has been paid to the domain decomposition strategy and to the code development of the solver, to ensure good load balancing and to minimize inter-processor communication, to achieve good performance and also high scalability on large computing clusters. |
|---|