Influence of the chemical mechanism in the frame of diesel-like CFD reacting spray simulations using a presumed PDF flamelet-based combustion model
[EN] The ability of a computational fluid dynamics (CFD) simulation to reproduce the diesel-like reacting spray ignition process and its corresponding flame structure strongly depends on both the fidelity of the chemical mechanism for reproducing the oxidation of the fuel and also on how the turbule...
| Autores: | , , , |
|---|---|
| Tipo de recurso: | capítulo de libro |
| Fecha de publicación: | 2017 |
| País: | España |
| Institución: | Universitat Politècnica de València (UPV) |
| Repositorio: | RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia |
| Idioma: | inglés |
| OAI Identifier: | oai:riunet.upv.es:10251/101599 |
| Acceso en línea: | https://riunet.upv.es/handle/10251/101599 |
| Access Level: | acceso abierto |
| Palabra clave: | Combustion modeling Chemical mechanism Spray A Flamelet |
| Sumario: | [EN] The ability of a computational fluid dynamics (CFD) simulation to reproduce the diesel-like reacting spray ignition process and its corresponding flame structure strongly depends on both the fidelity of the chemical mechanism for reproducing the oxidation of the fuel and also on how the turbulence-chemistry interaction (TCI) is modeled. Therefore, investigating the performance of different chemical mechanisms not only in perfect stirred reactors but directly in the diesel-like spray itself is of great interest in order to evaluate their suitability for being further applied to CFD engine simulations. This research work focuses on applying a presumed probability density function (PDF) unsteady flamelet combustion model to the well-known spray A from the Engine Combustion Network (ECN), using three chemical mechanisms widely accepted by the scientific community as a way to figure out the influence of chemistry in the key characteristics of the combustion process in the frame of diesel-like spray simulations. Results confirm that in spite of providing all of them correct trends for ignition delays (ID) and lift-off lengths (LOL), when comparing with experimental results, the structure of the flame presents noticeable differences, especially in the low and intermediate temperatures and high equivalence ratio regions. Consequently, the selection of the chemical mechanism has an impact on the zones of influence of key species as observed in both spatial coordinates and also in the equivalence ratio-temperature maps. These differences are expected to be relevant considering the implications when coupling pollutant emissions models. The analysis of temperature and oxygen concentration parametric studies evidences how the observed differences are consistent and moderately dependent on the ambient conditions. |
|---|