Mechanical behaviour and microstructural characteristics of high-silicon ultra-strong bainitic steels for hot rolling practice
High-silicon (1.5–2.5 wt%) steels were designed to achieve carbide-free bainitic matrices with retained austenite through industrial hot rolling, with coiling temperatures of 310 °C and 350 °C. The resulting ultrahigh strength steels (1409–1644 MPa) were characterized through tensile testing, Charpy...
| Autores: | , , , , |
|---|---|
| Tipo de recurso: | artículo |
| Estado: | Versión publicada |
| Fecha de publicación: | 2025 |
| País: | España |
| Institución: | Consejo Superior de Investigaciones Científicas (CSIC) |
| Repositorio: | DIGITAL.CSIC. Repositorio Institucional del CSIC |
| OAI Identifier: | oai:digital.csic.es:10261/388264 |
| Acceso en línea: | http://hdl.handle.net/10261/388264 |
| Access Level: | acceso abierto |
| Palabra clave: | Carbide-free bainite Retained austenite Austenite stability Toughness Crack resistance |
| Sumario: | High-silicon (1.5–2.5 wt%) steels were designed to achieve carbide-free bainitic matrices with retained austenite through industrial hot rolling, with coiling temperatures of 310 °C and 350 °C. The resulting ultrahigh strength steels (1409–1644 MPa) were characterized through tensile testing, Charpy impact toughness, and Kahn tear tests, while microstructural analysis was performed using scanning electron microscopy and X-ray diffraction. Both yield and tensile strengths correlated strongly with bainitic matrix characteristics, including phase fraction, dislocation density, carbon content, and plate thickness. Ductility showed dependence on film-type austenite content and M temperature, mechanical stability. The steels exhibited exceptional impact toughness meeting industrial requirements, with ductile fracture behaviour observed down to −100 °C, challenging previous findings. Crack resistance values matched or exceeded those of comparable ultrahigh strength steels. The lower coiling temperature (310 °C) produced retained austenite with higher mechanical stability, benefiting tensile properties and crack resistance, while impact toughness remained largely unaffected by austenite stability due to high strain rates. |
|---|