Economic impact of integrating PCM as passive system in buildingsusing Fanger comfort model
In buildings, HVAC systems consume a high amount of energy to provide thermal comfort for occupants. A methodology is presented in this paper to control thermostat operation of the buildings considering the effects of indoor and outdoor boundary conditions and phase change material (PCM) characteris...
| Autores: | , , , |
|---|---|
| Tipo de recurso: | artículo |
| Estado: | Versión aceptada para publicación |
| Fecha de publicación: | 2016 |
| País: | España |
| Institución: | Varias* (Consorci de Biblioteques Universitáries de Catalunya, Centre de Serveis Científics i Acadèmics de Catalunya) |
| Repositorio: | Recercat. Dipósit de la Recerca de Catalunya |
| OAI Identifier: | oai:recercat.cat:10459.1/57842 |
| Acceso en línea: | https://doi.org/10.1016/j.enbuild.2015.12.006 http://hdl.handle.net/10459.1/57842 |
| Access Level: | acceso abierto |
| Palabra clave: | PCM in building envelopes Fanger thermal comfort Energy Plus simulation Payback period |
| Sumario: | In buildings, HVAC systems consume a high amount of energy to provide thermal comfort for occupants. A methodology is presented in this paper to control thermostat operation of the buildings considering the effects of indoor and outdoor boundary conditions and phase change material (PCM) characteristics. EnergyPlus v8.1 building energy simulation software was used to analyze the energy performance of the PCM incorporated building models and to implement Fanger model to control HVAC thermostat operation according to BS EN 15251:2007 thermal comfort categories. Three types of building HVAC schedule, PCM with different melting points and layer thicknesses were studied for Madrid climate zone. Moreover, the impact of occupants clothing on the energy consumption was investigated. Furthermore, payback analysis was conducted to find out the economic benefits of PCM integration into the building envelopes. Application of PCM improved the cooling and heating energy performances except for the office model in winter (heating period). Additionally, higher energy savings and lower payback periods were observed when PCM with higher melting point was applied to the buildings. Eventually, energy savings in PCM incorporated models were found to improve further when occupants changed their clothing behavior in winter. |
|---|