Self-Propagating High-Temperature Synthesis of High-Entropy Composite in a Ti–Cr–Mn–Co–Ni–Al–C System
High-entropy materials have emerged as promising candidates for high-temperature structural, magnetic, and electrochemical applications due to their unique combination of compositional complexity, thermal stability, and tailored functionality. In this study, self-propagating high-temperature synthes...
| Autores: | , , , , |
|---|---|
| Tipo de recurso: | artículo |
| Estado: | Versión publicada |
| Fecha de publicación: | 2025 |
| País: | España |
| Institución: | Consejo Superior de Investigaciones Científicas (CSIC) |
| Repositorio: | DIGITAL.CSIC. Repositorio Institucional del CSIC |
| OAI Identifier: | oai:digital.csic.es:10261/421150 |
| Acceso en línea: | http://hdl.handle.net/10261/421150 https://www.scopus.com/inward/record.uri?eid=2-s2.0-105025825122&doi=10.3390%2Fceramics8040137&partnerID=40&md5=fd93c48dcffe384b2d09b008193e2e15 |
| Access Level: | acceso abierto |
| Palabra clave: | high-entropy alloy high-entropy composite microhardness oxidation resistance self-propagating high-temperature synthesis spark plasma sintering titanium carbide |
| Sumario: | High-entropy materials have emerged as promising candidates for high-temperature structural, magnetic, and electrochemical applications due to their unique combination of compositional complexity, thermal stability, and tailored functionality. In this study, self-propagating high-temperature synthesis (SHS) was employed to fabricate high-entropy composite in a Ti–Cr–Mn–Co–Ni–Al–C multicomponent system with a focus on elucidating the effect of titanium content on the combustion parameters, as well as on the phase and structure formation patterns of the resulting materials. In situ profiling enables evaluating the maximum combustion temperature of 1560 °C, combustion wave propagation velocity ranging from 0.22 to 4.3 mm/s depending on titanium content, and heating and cooling rates of 300–2000 °C/s and 3 °C/s during synthesis. The synthesized powders exhibited a bimodal particle size distribution, with ~90% of particles below 25 μm and a D50 of 5.38 μm. Post-synthesis densification via spark plasma sintering (SPS) at 1250 °C under 45 MPa yielded dense bulk samples, which exhibited a high relative density and high Vickers microhardness of 1270 ± 35 HV10 attributed to fine TiC dispersion and secondary carbide formation. Thermogravimetric analysis performed under air flow with a heating rate of 20 °C/min showed enhanced thermal stability for both the powder and the sintered bulk. These findings demonstrate the efficacy of SHS for rapid, energy-efficient fabrication of high-entropy composites and underscore the critical role of composition in tailoring their structural and mechanical properties. © 2025 by the authors. |
|---|