Effect of cage size on the selective conversion of methanol to light olefins

[EN] Zeolites that contain eight-membered ring pores but different cavity geometries (LEV, CHA, and AFX structure types) are synthesized at similar Si/Al ratios and crystal sizes. These materials are tested as catalysts for the selective conversion of methanol to light olefins. At 400 degrees C, atm...

ver descrição completa

Detalhes bibliográficos
Autores: Bhawe, Yashodhan, Lunn, Jonathan D., Liu, Yu, Malek, Andrzej, Davis, Mark, Moliner Marin, Manuel|||0000-0002-5440-716X
Tipo de documento: artigo
Data de publicação:2012
País:España
Recursos:Universitat Politècnica de València (UPV)
Repositório:RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Idioma:inglês
OAI Identifier:oai:riunet.upv.es:10251/29276
Acesso em linha:https://riunet.upv.es/handle/10251/29276
Access Level:Acceso aberto
Palavra-chave:Methanol-to-olefins
Zeolite
CHA
LEV
AFX
Descrição
Resumo:[EN] Zeolites that contain eight-membered ring pores but different cavity geometries (LEV, CHA, and AFX structure types) are synthesized at similar Si/Al ratios and crystal sizes. These materials are tested as catalysts for the selective conversion of methanol to light olefins. At 400 degrees C, atmospheric pressure, and 100% conversion of methanol, the ethylene selectivity decreases as the cage size increases. Variations in the Si/Al ratio of the LEV and CHA show that the maximum selectivity occurs at Si/Al = 15-18. Because lower Si/Al ratios tend to produce faster deactivation rates and poorer selectivities, reactivity comparisons between frameworks are performed with solids having a ratio Si/Al = 15-18. With LEV and AFX, the data are the first from materials with this high Si/Al. At similar Si/Al and primary crystallite size, the propylene, selectivity for the material with the CHA structure exceeds those from either the LEV or AFX structure. The AFX material gives the shortest reaction lifetime, but has the lowest amount of carbonaceous residue after reaction. Thus, there appears to be an intermediate cage size for maximizing the production of light olefins and propylene selectivities equivalent to or exceeding ethylene selectivities.