High Voltage 4H-SiC Power MOSFETs with Boron doped gate oxide
A new process technology for 4H-SiC planar power MOSFETs based on a Boron diffusion step to improve the SiO2/SiC interface quality is presented in this work. Large area (up to 25 mm2) power MOSFETs of three voltages ratings (1.7 kV, 3.3 kV and 4.5 kV) have been fabricated showing significant improve...
| Autores: | , , , , , , , , , |
|---|---|
| Tipo de recurso: | artículo |
| Fecha de publicación: | 2017 |
| País: | España |
| Institución: | Universidad de Oviedo (UNIOVI) |
| Repositorio: | RUO. Repositorio Institucional de la Universidad de Oviedo |
| Idioma: | inglés |
| OAI Identifier: | oai:digibuo.uniovi.es:10651/43447 |
| Acceso en línea: | http://hdl.handle.net/10651/43447 https://dx.doi.org/10.1109/TIE.2017.2723865 |
| Access Level: | acceso abierto |
| Palabra clave: | Gate dielectric High Voltage Power MOSFET SiC Wide Band Gap Semiconductors |
| Sumario: | A new process technology for 4H-SiC planar power MOSFETs based on a Boron diffusion step to improve the SiO2/SiC interface quality is presented in this work. Large area (up to 25 mm2) power MOSFETs of three voltages ratings (1.7 kV, 3.3 kV and 4.5 kV) have been fabricated showing significant improvements in terms of inversion channel mobility and on-resistance in comparison with counterparts without Boron oxide treatment. Experimental results show a remarkable increase of the channel mobility, which raises the device current capability, especially at room temperature. When operating at high temperature, the impact of the high channel mobility due to Boron treatment on electrical forward characteristics is reduced as the drift layer resistance starts to dominate in the total on-state resistance. In addition, the 3rd quadrant characteristics approximate to those of an ideal PiN diode, and the device blocking capability is not compromised by the use of Boron for the gate oxide formation. The experimental performance in a simple DC/DC converter is also presented. |
|---|