Conditions for the joint conversion of CO2 and syngas in the direct synthesis of light olefins using In2O3−ZrO2/SAPO-34 catalyst

The conditions for promoting the joint conversion of CO2 and syngas in the direct synthesis of light olefins have been studied. In addition, given the relevance for the viability of the process, the stability of the In2O3−ZrO2/SAPO-34 (InZr/S34) catalyst has also been pursued. The CO+CO2 (COx) hydro...

ver descrição completa

Detalhes bibliográficos
Autores: Portillo Bazaco, Ander, Ateka Bilbao, Ainara, Ereña Loizaga, Javier, Aguayo Urquijo, Andrés Tomás, Bilbao Elorriaga, Javier
Formato: artículo
Fecha de publicación:2021
País:España
Recursos:Universidad del País Vasco
Repositorio:Addi. Archivo Digital para la Docencia y la Investigación
OAI Identifier:oai:addi.ehu.eus:10810/67533
Acesso em linha:http://hdl.handle.net/10810/67533
Access Level:acceso abierto
Palavra-chave:CO2
olefins
In2O3 catalyst
OX-ZEO catalyst
methanol synthesis
coke
Descrição
Resumo:The conditions for promoting the joint conversion of CO2 and syngas in the direct synthesis of light olefins have been studied. In addition, given the relevance for the viability of the process, the stability of the In2O3−ZrO2/SAPO-34 (InZr/S34) catalyst has also been pursued. The CO+CO2 (COx) hydrogenation experimental runs were conducted in a packed bed isothermal reactor under the following conditions: 375−425 °C; 20−40 bar; space time, 1.25−20 gcatalyst h molC −1; H2/(COx) ratio in the feed, 1−3; CO2/(COx) ratio in the feed, 0.5; time on stream (TOS), up to 24 h. Analyzing the reaction indices (CO2 and COx conversions, yield and selectivity of olefins and paraffins, and stability), the following have been established as suitable conditions: 400 °C, 30 bar, 5−10 gcat h molC −1, CO2/COx = 0.5, and H2/COx = 3. Under these conditions, the catalyst is stable (after an initial period of deactivation by coke), and olefin yield and selectivity surpass 4 and 70%, respectively, with light paraffins as byproducts. Produced olefin yields follow propylene > ethylene > butenes. The conditions of the process (low pressure and low H2/COx ratio) may facilitate the integration of sustainable H2 production with PEM electrolyzers and the covalorization of CO2 and syngas obtained from biomass.