Optimization of a Sequential Extraction Scheme for Speciation of Metals in Fine Urban Particles
A sequential extraction procedure fractioned in four steps was optimized with the purpose of improving a previous scheme for determining the chemical forms of metals in fine airborne particles. The optimization was tested on synthetic samples and then confirmed on real samples of fine particles, opt...
| Autores: | , , , , |
|---|---|
| Tipo de recurso: | artículo |
| Estado: | Versión aceptada para publicación |
| Fecha de publicación: | 2002 |
| País: | España |
| Institución: | Universidad de Sevilla (US) |
| Repositorio: | idUS. Depósito de Investigación de la Universidad de Sevilla |
| OAI Identifier: | oai:idus.us.es:11441/156184 |
| Acceso en línea: | https://hdl.handle.net/11441/156184 https://doi.org/10.1080/713746659 |
| Access Level: | acceso abierto |
| Palabra clave: | Chemical Speciation Metals Airborne Optimization Fine Particles Urban Pollution |
| Sumario: | A sequential extraction procedure fractioned in four steps was optimized with the purpose of improving a previous scheme for determining the chemical forms of metals in fine airborne particles. The optimization was tested on synthetic samples and then confirmed on real samples of fine particles, optimizing the type of reagent, its concentration, pH, temperature and extraction time. Synthetic samples were prepared in the laboratory with compounds of reagent grade. The analytical method applied consisted of extracting the metals from each sample in a rotator with each type of reagent under different conditions of the parameters and then centrifuging before measuring by ICP-AES. The improved and previous scheme was checked on real samples and the differences were significant in the percentages of the soluble chemical forms in the improved scheme (5.2% in front to 22.0% for Pb, 27.0% in front to 50.0% for Cd and 32.4% in front to 9.0% for Ni) from 55.6, 0.23 and 1.48 ng m− 3 of total metal concentrations respectively |
|---|