Use of response surface methodology to optimize triclosan adsorption on alumina pillared clays in a fixed-bed column for applications in solid-phase extraction
Fixed-bed column studies are generally conducted to consider possible applications in water-purification processes. In this work, three synthetic alumina pillared interlayered clays (Al-PILC) were analyzed in fixed-bed column studies for use as sorbents for solid-phase extraction (SPE) for the first...
| Autores: | , , |
|---|---|
| Tipo de recurso: | artículo |
| Estado: | Versión aceptada para publicación |
| Fecha de publicación: | 2023 |
| País: | España |
| Institución: | Universidad Pública de Navarra |
| Repositorio: | Academica-e. Repositorio Institucional de la Universidad Pública de Navarra |
| OAI Identifier: | oai:academica-e.unavarra.es:2454/44889 |
| Acceso en línea: | https://hdl.handle.net/2454/44889 |
| Access Level: | acceso abierto |
| Palabra clave: | Adsorption Solid-phase extraction Response surface methodology Pillared clays Emerging pollutants |
| Sumario: | Fixed-bed column studies are generally conducted to consider possible applications in water-purification processes. In this work, three synthetic alumina pillared interlayered clays (Al-PILC) were analyzed in fixed-bed column studies for use as sorbents for solid-phase extraction (SPE) for the first time. Adsorption processes were studied for triclosan (TCS), which is an emerging pollutant (EP) that has been shown to have several health effects. Breakthrough curves were investigated by varying process parameters such as bed height (0.25–0.75 cm), inlet TCS concentration (20–60 mg/cm3 ), and flow rate (0.5–3 cm3 /min). Bohart-Adams, Bed Depth Service Time (BDST), and Thomas models were satisfactory applied to the results obtained for fixed-bed columns. The adsorption of TCS was successfully optimized for use in SPE for the three adsorbents studied using response surface methodology with a Box–Behnken design (RSM-BBD). The models developed were adequate for the experimental data (95% significance level), with high regression parameters (98.9–99.1). The optimum values for TCS adsorption on the fixed-bed column were 378.04, 367.78, and 378.93 mg (amount of adsorbent packed into the column), 0.5 cm3 /min (flow rate), 4.24, 3.96, and 3.85 (pH), and 2.56, 1.93, and 1.13 mg/dm3 (inlet TCS concentration) for Al-PILCAE, Al-PILCBE, and Al-PILCCM, respectively. From these results synthetic Al-PILC are effective and promising sorbents that can be used for analytical purposes in SPE, and that RSM-BDD is an effective and reliable tool for evaluating and optimizing the adsorption conditions for emerging contaminants in a fixed-bed column system. |
|---|