Conductance-frequency droop control to ensure transient stability of inverter-based stand-alone microgrids
Currently, inverter-based stand-alone microgrids are gaining interest due to the advantages of obtaining energy from renewable sources. To manage the operation, these microgrids include storage systems connected in par- allel to the PCC through electronic inverters that are controlled as voltage sou...
| Autores: | , , |
|---|---|
| Tipo de recurso: | artículo |
| Estado: | Versión publicada |
| Fecha de publicación: | 2023 |
| País: | España |
| Institución: | Universidad Pública de Navarra |
| Repositorio: | Academica-e. Repositorio Institucional de la Universidad Pública de Navarra |
| OAI Identifier: | oai:academica-e.unavarra.es:2454/44663 |
| Acceso en línea: | https://hdl.handle.net/2454/44663 |
| Access Level: | acceso abierto |
| Palabra clave: | Inverter-based microgrids Droop control Current limitation Overloads Short-circuits |
| Sumario: | Currently, inverter-based stand-alone microgrids are gaining interest due to the advantages of obtaining energy from renewable sources. To manage the operation, these microgrids include storage systems connected in par- allel to the PCC through electronic inverters that are controlled as voltage sources in order to support the fre- quency and voltage at the PCC. For the purpose of ensuring P and Q sharing among inverters and also the synchronization stability of the microgrid, droop control is widely used, achieving a satisfactory performance in normal operation. Nevertheless, in the presence of overloads or short-circuits, the inverters must limit the current for self-protection, thereby modifying the performance of the system that then becomes prone to suffer transient stability problems. In this paper, first the performance of the inverter-based stand-alone microgrids with the conventional P-f and Iact-f droops is analyzed, obtaining the stability boundaries during current limitation. In order to always ensure the synchronization stability of the system, this paper then proposes the G-f droop that consists in employing the equivalent conductance seen by each inverter for its frequency droop control. Furthermore, as this variable always correctly represents the inverter power angle, the system dynamics are not affected by the operating conditions. The theoretical results have been validated by means of simulation and Hardware-In-the-Loop results, showing the superior performance of the proposed G-f droop |
|---|