Electrodialysis with bipolar membranes for the generation of NaOH and HCl solutions from brines: an inter-laboratory evaluation of thin and ultrathin non-woven cloth-based ion-exchange membranes
The SEArcularMINE project aims to recover critical raw materials (CRMs) from brines from saltworks, thus facing a CRM shortage within Europe. To promote a fully circular scheme, the project valorises concentrated brines using electrodialysis with bipolar membranes (EDBM) to generate the required amo...
| Autores: | , , , , , , , , |
|---|---|
| Tipo de recurso: | artículo |
| Fecha de publicación: | 2022 |
| País: | España |
| Institución: | Universitat Politècnica de Catalunya (UPC) |
| Repositorio: | UPCommons. Portal del coneixement obert de la UPC |
| Idioma: | inglés |
| OAI Identifier: | oai:upcommons.upc.edu:2117/383494 |
| Acceso en línea: | https://hdl.handle.net/2117/383494 https://dx.doi.org/10.3390/membranes12121204 |
| Access Level: | acceso abierto |
| Palabra clave: | Saline water conversion -- Electrodialysis process BMED Acid-base production Brine management Brine intensification Ion-exchange membrane Electro-membrane Aigua salada -- Dessalatge -- Electrodiàlisi Àrees temàtiques de la UPC::Enginyeria química |
| Sumario: | The SEArcularMINE project aims to recover critical raw materials (CRMs) from brines from saltworks, thus facing a CRM shortage within Europe. To promote a fully circular scheme, the project valorises concentrated brines using electrodialysis with bipolar membranes (EDBM) to generate the required amounts of reactants (i.e., acids and bases). Regarding the performances of new non-woven cloth ion-exchange membranes (Suez): (i) an ultra-thin non-woven polyester cloth and (ii) a thin polypropylene cloth acting as the support structures were assessed. Additionally, the anion layer includes a catalyst to promote the water dissociation reaction. The effect of current density (100, 200, and 300 Am-2) on the performance of two combinations of membranes in an inter-laboratory exercise using 2 M NaCl was evaluated. According to statistical analysis ANOVA, there was an agreement on the results obtained in both laboratories. NaOH/HCl solutions up to 0.8 M were generated working at 300 A m-2 using both combinations of membranes. Regarding the performance parameters, stack set-ups incorporating thin polypropylene membranes showed lower specific energy consumption (SEC) and higher specific productivity (SP) than ultra-thin polypropylene ones. Hence, for ultra-thin polypropylene membranes, SEC was reported to be between 2.18 and 1.69 kWh kg-1 NaOH and SP between 974 and 314 kg m-2 y-1. |
|---|