Study of the structural behavior of hybrid elements of carbon fiber reinforced polymer and concrete
Creating sustainability and public infrastructure is a fairly recent subject the engineering community has been debating. Introducing new building materials or introducing new structural designs is a strategy for constructing buildings that have long-term reliability and low maintenance requirements...
| Autor: | |
|---|---|
| Tipo de recurso: | tesis doctoral |
| Estado: | Versión publicada |
| Fecha de publicación: | 2021 |
| País: | España |
| Institución: | CBUC, CESCA |
| Repositorio: | TDR. Tesis Doctorales en Red |
| OAI Identifier: | oai:www.tdx.cat:10803/673230 |
| Acceso en línea: | http://hdl.handle.net/10803/673230 https://dx.doi.org/10.5821/dissertation-2117-360908 |
| Access Level: | acceso abierto |
| Palabra clave: | CFRP Concrete Hybrid slabs Bending test Shear test Modal analysis Shear connection Hormigón Losas híbridas Test de flexión Àrees temàtiques de la UPC::Enginyeria civil 620 624 |
| Sumario: | Creating sustainability and public infrastructure is a fairly recent subject the engineering community has been debating. Introducing new building materials or introducing new structural designs is a strategy for constructing buildings that have long-term reliability and low maintenance requirements. Fiber-reinforced polymers (FRP) are one of the innovative approaches in the field of civil engineering that offer promising results in this regard. In order to maximize the usage of FRP forms, researchers suggested the development of hybrid structural structures by mixing composite materials with standard materials, such as concrete, to enhance the stability, ductility and buckling resistance of single FRP members. Nevertheless, these composite solutions need more preliminary research to prove its feasibility due to the complexity and large range of hybrid components. However, as there is a current shortage of compulsory codes for the design of composite structures and consequently FRP-concrete members, accurate predictive models need to be created. Thus, the present work aims at testing the structural efficiency of hybrid slabs made of CFRP sheets under a concrete layer in bending and shear configurations by carrying an experimental and analytical analysis. Using Carbon Fiber Reinforced Polymer (CFRP) bonded with resin is usual to strengthen concrete slabs or other elements. This thesis introduces a novel technological definition of thin CFRP-concrete unidirectional hybrid slabs. In bending part, experimental quasi-static three-points bending tests and modal analysis tests were carry out to analyze the influence of the connection systems on the dynamic response. Moreover, the corresponding analytical methodology to calculate their response are presented. Four different connection strategies between CFRP sheet and concrete were tested. These included flexible mesh embedding and particle-based frictional enhancement. The maximum bending moment, the evolution of the neutral axis, the comparison between external moment (calculated from applied load) and internal moment (calculated from strain distribution), the CFRP-concrete interface shear stress, and the evolution of the vertical displacement at the loading point are the main results obtained from the tests. In shear part, this work investigates the shear behavior of hybrid slabs that used different types of particles and/or a flexible high strength fabric to connect both materials: concrete and CFRP sheet. Several pure-shear experiments have been carried out to characterize the interface shear response of these hybrid elements. These increase the experimental database on CFPR-concrete shear connection systems. Experimental results showed that the improvement resulting from fabric embedding is far more significant than other tested connection elements at increasing the shear connection strength between the parts of the composite slabs. Results are divided with technological and scientific contributions. The feasibility of using CFRP sheets in hybrid unidirectional slabs instead of steel sheets is the main technological contribution, which also offers the following advantages: lighter weight and resistance to corrosion. Qualitative and quantitative analysis of the CFRP-concrete connection alternatives point out that combining adherence and frictional based strategies is the most promising method. An analytical method for the modelling of concrete slabs with CFRP was developed. In function of full cross-section interaction some equations for bending ultimate limit states were suggested. The possibility of using simpler formulas for quantifying interlayer slip effects was analyzed in assessing deflections, flexural stiffness, bending efficiency and normal and shear stress distributions. The proposed analytical method was able to capture the structural behavior and performance of the specimens. |
|---|