Parameter estimation of a single-phase boost PFC converter with EMI filter based on an optimization algorithm

This paper proposes an approach to estimate the parameters of an AC–DC boost power factor corrector converter that includes an EMI filter. To this end, once the topology was known, the values of the passive elements were identified from measurements at the input and output terminals of the converter...

ver descrição completa

Detalhes bibliográficos
Autores: Rojas Dueñas, Gabriel, Riba Ruiz, Jordi-Roger|||0000-0001-8774-2389, Moreno Eguilaz, Juan Manuel|||0000-0001-6086-7034
Formato: artículo
Fecha de publicación:2021
País:España
Recursos:Universitat Politècnica de Catalunya (UPC)
Repositorio:UPCommons. Portal del coneixement obert de la UPC
Idioma:inglés
OAI Identifier:oai:upcommons.upc.edu:2117/347983
Acesso em linha:https://hdl.handle.net/2117/347983
https://dx.doi.org/10.3390/electronics10111231
Access Level:acceso abierto
Palavra-chave:Analog-to-digital converters
Power factor correction
EMI filter
Parameter identification
Boost converter
Convertidors analògic/digitals
Àrees temàtiques de la UPC::Enginyeria electrònica
id ES_11ed011817f47b33d76ed2f065a4a7ff
oai_identifier_str oai:upcommons.upc.edu:2117/347983
network_acronym_str ES
network_name_str España
repository_id_str
spelling Parameter estimation of a single-phase boost PFC converter with EMI filter based on an optimization algorithmRojas Dueñas, GabrielRiba Ruiz, Jordi-Roger|||0000-0001-8774-2389Moreno Eguilaz, Juan Manuel|||0000-0001-6086-7034Analog-to-digital convertersPower factor correctionEMI filterParameter identificationBoost converterConvertidors analògic/digitalsÀrees temàtiques de la UPC::Enginyeria electrònicaThis paper proposes an approach to estimate the parameters of an AC–DC boost power factor corrector converter that includes an EMI filter. To this end, once the topology was known, the values of the passive elements were identified from measurements at the input and output terminals of the converter. The parameters of the converter were identified based on the trust region nonlinear least squares algorithm. The steady-state and the transient signals of the converter at the input/output terminals were acquired non-intrusively without any internal modification of the circuitry. The accuracy of the proposed parameter identification approach was determined by comparing the estimated values with those provided by the manufacturer, and by comparing the measured signals with those obtained with a simulation model that included the estimated values of the parameters. The results presented in this paper prove the accuracy of the proposed approach, which can be extended to other power converters and filters.Peer Reviewed20212021-05-2120212021-06-28journal articlehttp://purl.org/coar/resource_type/c_6501VoRhttp://purl.org/coar/version/c_970fb48d4fbd8a85info:eu-repo/semantics/articleapplication/pdfhttps://hdl.handle.net/2117/347983https://dx.doi.org/10.3390/electronics10111231reponame:UPCommons. Portal del coneixement obert de la UPCinstname:Universitat Politècnica de Catalunya (UPC)Inglésengopen accesshttp://purl.org/coar/access_right/c_abf2Attribution-NonCommercial-NoDerivs 3.0 Spainhttp://creativecommons.org/licenses/by-nc-nd/3.0/es/info:eu-repo/semantics/openAccessoai:upcommons.upc.edu:2117/3479832026-05-27T15:37:01Z
dc.title.none.fl_str_mv Parameter estimation of a single-phase boost PFC converter with EMI filter based on an optimization algorithm
title Parameter estimation of a single-phase boost PFC converter with EMI filter based on an optimization algorithm
spellingShingle Parameter estimation of a single-phase boost PFC converter with EMI filter based on an optimization algorithm
Rojas Dueñas, Gabriel
Analog-to-digital converters
Power factor correction
EMI filter
Parameter identification
Boost converter
Convertidors analògic/digitals
Àrees temàtiques de la UPC::Enginyeria electrònica
title_short Parameter estimation of a single-phase boost PFC converter with EMI filter based on an optimization algorithm
title_full Parameter estimation of a single-phase boost PFC converter with EMI filter based on an optimization algorithm
title_fullStr Parameter estimation of a single-phase boost PFC converter with EMI filter based on an optimization algorithm
title_full_unstemmed Parameter estimation of a single-phase boost PFC converter with EMI filter based on an optimization algorithm
title_sort Parameter estimation of a single-phase boost PFC converter with EMI filter based on an optimization algorithm
dc.creator.none.fl_str_mv Rojas Dueñas, Gabriel
Riba Ruiz, Jordi-Roger|||0000-0001-8774-2389
Moreno Eguilaz, Juan Manuel|||0000-0001-6086-7034
author Rojas Dueñas, Gabriel
author_facet Rojas Dueñas, Gabriel
Riba Ruiz, Jordi-Roger|||0000-0001-8774-2389
Moreno Eguilaz, Juan Manuel|||0000-0001-6086-7034
author_role author
author2 Riba Ruiz, Jordi-Roger|||0000-0001-8774-2389
Moreno Eguilaz, Juan Manuel|||0000-0001-6086-7034
author2_role author
author
dc.subject.none.fl_str_mv Analog-to-digital converters
Power factor correction
EMI filter
Parameter identification
Boost converter
Convertidors analògic/digitals
Àrees temàtiques de la UPC::Enginyeria electrònica
topic Analog-to-digital converters
Power factor correction
EMI filter
Parameter identification
Boost converter
Convertidors analògic/digitals
Àrees temàtiques de la UPC::Enginyeria electrònica
description This paper proposes an approach to estimate the parameters of an AC–DC boost power factor corrector converter that includes an EMI filter. To this end, once the topology was known, the values of the passive elements were identified from measurements at the input and output terminals of the converter. The parameters of the converter were identified based on the trust region nonlinear least squares algorithm. The steady-state and the transient signals of the converter at the input/output terminals were acquired non-intrusively without any internal modification of the circuitry. The accuracy of the proposed parameter identification approach was determined by comparing the estimated values with those provided by the manufacturer, and by comparing the measured signals with those obtained with a simulation model that included the estimated values of the parameters. The results presented in this paper prove the accuracy of the proposed approach, which can be extended to other power converters and filters.
publishDate 2021
dc.date.none.fl_str_mv 2021
2021-05-21
2021
2021-06-28
dc.type.none.fl_str_mv journal article
http://purl.org/coar/resource_type/c_6501
VoR
http://purl.org/coar/version/c_970fb48d4fbd8a85
dc.type.openaire.fl_str_mv info:eu-repo/semantics/article
format article
dc.identifier.none.fl_str_mv https://hdl.handle.net/2117/347983
https://dx.doi.org/10.3390/electronics10111231
url https://hdl.handle.net/2117/347983
https://dx.doi.org/10.3390/electronics10111231
dc.language.none.fl_str_mv Inglés
eng
language_invalid_str_mv Inglés
language eng
dc.rights.none.fl_str_mv open access
http://purl.org/coar/access_right/c_abf2
Attribution-NonCommercial-NoDerivs 3.0 Spain
http://creativecommons.org/licenses/by-nc-nd/3.0/es/
dc.rights.openaire.fl_str_mv info:eu-repo/semantics/openAccess
rights_invalid_str_mv open access
http://purl.org/coar/access_right/c_abf2
Attribution-NonCommercial-NoDerivs 3.0 Spain
http://creativecommons.org/licenses/by-nc-nd/3.0/es/
eu_rights_str_mv openAccess
dc.format.none.fl_str_mv application/pdf
dc.source.none.fl_str_mv reponame:UPCommons. Portal del coneixement obert de la UPC
instname:Universitat Politècnica de Catalunya (UPC)
instname_str Universitat Politècnica de Catalunya (UPC)
reponame_str UPCommons. Portal del coneixement obert de la UPC
collection UPCommons. Portal del coneixement obert de la UPC
repository.name.fl_str_mv
repository.mail.fl_str_mv
_version_ 1869403591043710976
score 15,301629

Registos relacionados