Effect of electron number densities on the radio signal propagation in an inductively coupled plasma facility
Spacecraft entering a planetary atmosphere are surrounded by a plasma layer containing high levels of ionization, due to the extreme temperatures in the shock layer. The high electron number densities cause attenuation of the electromagnetic waves emitted by the on-board antennas, leading to communi...
| Autores: | , , , , , |
|---|---|
| Tipo de recurso: | artículo |
| Fecha de publicación: | 2023 |
| País: | España |
| Institución: | Universitat Politècnica de Catalunya (UPC) |
| Repositorio: | UPCommons. Portal del coneixement obert de la UPC |
| Idioma: | inglés |
| OAI Identifier: | oai:upcommons.upc.edu:2117/394242 |
| Acceso en línea: | https://hdl.handle.net/2117/394242 https://dx.doi.org/10.1016/j.actaastro.2023.07.028 |
| Access Level: | acceso abierto |
| Palabra clave: | Radio wave propagation Communication blackout Radio signal propagation Plasma flow Inductively coupled plasma wind tunnel Electron number density Ray tracing Ones de ràdio -- Propagació Àrees temàtiques de la UPC::Enginyeria de la telecomunicació::Processament del senyal |
| Sumario: | Spacecraft entering a planetary atmosphere are surrounded by a plasma layer containing high levels of ionization, due to the extreme temperatures in the shock layer. The high electron number densities cause attenuation of the electromagnetic waves emitted by the on-board antennas, leading to communication blackout for several minutes. This work presents experimental measurements of signal propagation through an ionized plasma flow. The measurements are conducted at the VKI plasma wind tunnel (Plasmatron) using conical horn antennas transmitting in the Ka-band, between 33 and 40 GHz. Testing conditions at 15, 50 and 100 mbar, and powers between 100 and 600 kW cover a broad range of the testing envelope of the Plasmatron as well as a broad range of atmospheric entry conditions. The transmitting antenna is characterized at the UPC anechoic chamber, obtaining the radiation patterns, beamwidth, and gain at the boresight direction; and an optical ray tracing technique is used to describe the electromagnetic waves propagation in the plasma flowfield inside of the Plasmatron chamber. The signal propagation measurements show clear attenuation when the signal is propagating through the plasma, varying between 2 and 15 dB depending on the testing conditions. This attenuation increases with electron number densities, which are driven by the Plasmatron power and pressure settings. Preliminary evidence of Faraday rotation effects caused by the plasma is also observed. |
|---|