A visual validation of the combined effect of pH and dilution on the porosity of carbon xerogels
The hypothesis about the formation of the porous structure of carbon xerogels when the pH and the dilution ratio of the precursor solution are simultaneously modified has been validated by means of scanning electron microscope analysis. The morphology of the carbon xerogels showed that the size and...
| Autores: | , , |
|---|---|
| Tipo de recurso: | artículo |
| Estado: | Versión aceptada para publicación |
| Fecha de publicación: | 2015 |
| País: | España |
| Institución: | Consejo Superior de Investigaciones Científicas (CSIC) |
| Repositorio: | DIGITAL.CSIC. Repositorio Institucional del CSIC |
| OAI Identifier: | oai:digital.csic.es:10261/132917 |
| Acceso en línea: | http://hdl.handle.net/10261/132917 |
| Access Level: | acceso abierto |
| Palabra clave: | Carbon xerogels Microwave heating Tailored porosity Scanning electron microscope |
| Sumario: | The hypothesis about the formation of the porous structure of carbon xerogels when the pH and the dilution ratio of the precursor solution are simultaneously modified has been validated by means of scanning electron microscope analysis. The morphology of the carbon xerogels showed that the size and number of the clusters produced during the sol–gel reaction is not only influenced by the pH but also by the dilution ratio. As with a decrease in the pH value, an increase in the dilution ratio caused the formation of a small number of large clusters, leading to materials with large pores. However, depending on the values selected the effect of the pH and dilution ratio was enhanced or diminished by the effect of the other. Hence, an appropriate adjustment of these two variables allowed microporous, micro-mesoporous and micro-macroporous materials to be obtained with pore volumes that could not be achieved by modifying the pH or the dilution ratio separately. |
|---|