Determination of fouling mechanisms in polymeric ultrafiltration membranes using residual brines from table olive storage wastewaters as feed

[EN] In this work, the fouling mechanisms that dominate the ultrafiltration of residual brines from table olive packing plant wastewaters were investigated. For that purpose, Hermia's models adapted to crossflow filtration, resistance-in-series model and a model combining intermediate block...

Descripción completa

Detalles Bibliográficos
Autores: Carbonell Alcaina, Carlos|||0000-0002-0878-8977, Alvarez Blanco, Silvia, Bes-Piá, M.A.|||0000-0001-8005-7450, Mendoza Roca, José Antonio, Corbatón Báguena, María José, Pastor Alcañiz, Laura
Tipo de recurso: artículo
Fecha de publicación:2016
País:España
Institución:Universitat Politècnica de València (UPV)
Repositorio:RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Idioma:inglés
OAI Identifier:oai:riunet.upv.es:10251/99179
Acceso en línea:https://riunet.upv.es/handle/10251/99179
Access Level:acceso abierto
Palabra clave:Ultrafiltration
Polyethersulfone membranes
Table olive packing plant wastewaters
Mathematical models
Fouling mechanisms
INGENIERIA QUIMICA
Descripción
Sumario:[EN] In this work, the fouling mechanisms that dominate the ultrafiltration of residual brines from table olive packing plant wastewaters were investigated. For that purpose, Hermia's models adapted to crossflow filtration, resistance-in-series model and a model combining intermediate blocking and cake formation mechanisms were fitted to the experimental data. Tests were performed with a 5 kDa polyethersulfone membrane at transmembrane pressures between 1 and 3 bar and crossflow velocities between 2.2 and 3.7 m s(-1). Results demonstrated that the resistance-in-series model was the most accurate to predict permeate flux evolution with time. The predominant fouling mechanism was cake formation followed by intermediate blocking/adsorption. The fouling resistances that were determined by means of the resistance in series model were tested using a well-established mathematical model proposed by Mondal and De that also combines both fouling phenomena (intermediate pore blocking and cake formation). Results demonstrated that the predicted resistances are consistent with those determined by Mondal and De's model. (C) 2016 Elsevier Ltd. All rights reserved.