Pushing Nuclear Magnetic Resonance sensitivity limits with home-built microfluidic chips and photo-CIDNP
Among the methods to enhance the sensitivity of nuclear magnetic resonance (NMR) spectroscopy, small-diameter NMR coils (microcoils) are promising tools to tackle the study of mass-limited samples. Alternatively, hyperpolarization schemes based on dynamic nuclear polarization techniques provide stro...
| Autor: | |
|---|---|
| Tipo de documento: | artigo |
| Data de publicação: | 2018 |
| País: | España |
| Recursos: | Universidad de Castilla-La Mancha |
| Repositório: | RUIdeRA. Repositorio Institucional de la UCLM |
| OAI Identifier: | oai:ruidera.uclm.es:10578/38532 |
| Acesso em linha: | https://hdl.handle.net/10578/38532 |
| Access Level: | Acesso embargado |
| Palavra-chave: | NMR. Microfluidics. Photo-CIDNP |
| Resumo: | Among the methods to enhance the sensitivity of nuclear magnetic resonance (NMR) spectroscopy, small-diameter NMR coils (microcoils) are promising tools to tackle the study of mass-limited samples. Alternatively, hyperpolarization schemes based on dynamic nuclear polarization techniques provide strong signal enhancements of the NMR target samples. Here we present a method to effortlessly perform photo-chemically induced dynamic nuclear polarization in microcoil setups to boost NMR signal detection down to sub-picomole detection limits in a 9.4T system (400 MHz 1H Larmor frequency). This setup is unaffected by current major drawbacks such as the use of high-power light sources to attempt uniform irradiation of the sample, and accumulation of degraded photosensitizer in the detection region. The latter is overcome with flow conditions, which in turn open avenues for complex applications requiring rapid and efficient mixing that are not easily achievable on an NMR tube without resorting to complex hardware. |
|---|