Retrofitting of biomass ultrafast hydrolysis by supercritical water. Effective design of upstream and downstream units
A successful implementation of green technologies in today’s society requires performing a progressive decentralization of the manufacturing processes from large scale production centers towards small scale decentralized facilities. In this context, biomass hydrolysis by supercritical water must pla...
| Autor: | |
|---|---|
| Tipo de recurso: | tesis doctoral |
| Fecha de publicación: | 2019 |
| País: | España |
| Institución: | Universidad de Valladolid |
| Repositorio: | UVaDOC. Repositorio Documental de la Universidad de Valladolid |
| OAI Identifier: | oai:uvadoc.uva.es:10324/35374 |
| Acceso en línea: | https://doi.org/10.35376/10324/35374 http://uvadoc.uva.es/handle/10324/35374 |
| Access Level: | acceso abierto |
| Palabra clave: | Hidrociclones Hidrólisis Atemperadores Mezclador cruzado |
| Sumario: | A successful implementation of green technologies in today’s society requires performing a progressive decentralization of the manufacturing processes from large scale production centers towards small scale decentralized facilities. In this context, biomass hydrolysis by supercritical water must play a leading role. First, the reduction of the reaction times to values lower than 1 second intensifies the process. Second, the high selectivities, reaching values up to 98%, eliminate further separation stages. Finally, since only water is used as solvent and reaction medium, the postprocessing of effluents is avoided. However, the operation of a real biomass hydrolysis plant still presents some challenges related to the combination of solid particles and high pressure processes and to the complexity of the biomass structure. The implementation of this technology in delocalized production centers strongly depends on overcoming these limitations. The aim of this thesis is to redesign and adapt the unit operations of the process of biomass hydrolysis by supercritical water to the raw materials and operating conditions expected in a real plant. |
|---|