Experimental performance of a novel scraped surface heat exchanger for latent energy storage for domestic hot water generation
In this work, a novel design of a real scale Scraped Surface Heat Exchanger (SSHE) for solar LTES has been developed and experimentally tested. The main issue in PCM heat exchangers is the growth of a solid layer at the heat transfer walls during the latent energy extraction/discharging, that lowers...
| Autores: | , , , |
|---|---|
| Tipo de recurso: | artículo |
| Estado: | Versión publicada |
| Fecha de publicación: | 2022 |
| País: | España |
| Institución: | Universidad Politécnica de Cartagena(UPCT) |
| Repositorio: | Repositorio Digital UPCT |
| OAI Identifier: | oai:repositorio.upct.es:10317/12141 |
| Acceso en línea: | http://hdl.handle.net/10317/12141 https://www.sciencedirect.com/science/article/pii/S096014812200698X |
| Access Level: | acceso abierto |
| Palabra clave: | Phase change material Scraped surface heat exchanger Solidification Solar latent thermal energy storage Domestic hot water Mecánica de Fluidos 2204 Física de Fluidos |
| Sumario: | In this work, a novel design of a real scale Scraped Surface Heat Exchanger (SSHE) for solar LTES has been developed and experimentally tested. The main issue in PCM heat exchangers is the growth of a solid layer at the heat transfer walls during the latent energy extraction/discharging, that lowers heat transfer. The removal of the solidified PCM through scraping increases the heat transfer rate with nearly constant heat flux. Those characteristics make it suitable for domestic hot water generation. Discharging tests have been performed in scraping and no scraping modes (SM and nSM). The heat release rate in SM has shown to be between two and three times higher than in nSM. Moreover, in SM there is a complete extraction of the available latent energy (11.9 MJ) in a short period, compared to nSM. Additionally, a performance comparison between the developed SSHE and those available in open literature has been done. The results of heat release density (4 kW/m2) and overall heat transfer coefficient (1000 W/m2K) have shown similar values, though the scraping mechanism, the rotational speed, the size and their energy capacity are different. The developed design is an appropriate technology to increase the efficiency in solar LTES. |
|---|