Influence of electrospinning parameters on Poly(hydroxybutyrate) electrospun membranes fiber size and distribution
Poly(hydroxybutyrate) (PHB) obtained from sugar cane waste was dissolved in a blend of chloroform and dimethylformamide (DMF) and electrospun at 40 degrees C. By adding DMF to the solution, the electrospinning process for the PHB polymer becomes more stable, allowing complete polymer crystallization...
| Autores: | , , , , , , |
|---|---|
| Tipo de recurso: | artículo |
| Fecha de publicación: | 2014 |
| País: | España |
| Institución: | Universitat Politècnica de València (UPV) |
| Repositorio: | RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia |
| Idioma: | inglés |
| OAI Identifier: | oai:riunet.upv.es:10251/64208 |
| Acceso en línea: | https://riunet.upv.es/handle/10251/64208 |
| Access Level: | acceso abierto |
| Palabra clave: | THERMOGRAVIMETRIC DATA POLYHYDROXYBUTYRATE MORPHOLOGY SCAFFOLDS BLENDS POLY(3-HYDROXYBUTYRATE) MATS POLY(3-HYDROXYBUTYRATE-CO-3-HYDROXYVALERATE) POLYHYDROXYALKANOATES BIOCOMPATIBILITY MAQUINAS Y MOTORES TERMICOS |
| Sumario: | Poly(hydroxybutyrate) (PHB) obtained from sugar cane waste was dissolved in a blend of chloroform and dimethylformamide (DMF) and electrospun at 40 degrees C. By adding DMF to the solution, the electrospinning process for the PHB polymer becomes more stable, allowing complete polymer crystallization during the jet travelling between the tip and the grounded collector. The influence of processing parameters on fiber size and distribution was systematically studied. It was observed that an increase of tip inner diameter promotes a decrease of the fiber average size and a broader distribution. Conversely, an increase of the electric field and flow rate produces an increase of fiber diameter until a maximum of similar to 2.0 mu m but for electric fields higher than 1.5 kV cm(-1), a decrease of the fiber diameter was observed. Polymer crystalline phase seems to be independent of the processing conditions and a crystallinity degree of 53% was found. Moreover, thermal degradation of the as-spun membrane occurs in single step degradation with activation energy of 91 kJ mol(-1). Furthermore, MC-3T3-E1 cell adhesion was not inhibited by the fiber mats preparation, indicating their potential use for biomedical applications. |
|---|