Particle size effect on the strength of particle-reinforced composites. Experimental analysis and comparison with the coupled criterion
Particle-reinforced composites are widely used in industry, primarily due to their versatile fabrication methods and the ability to tailor their properties. In many cases, extensive experimental campaigns are required to determine the optimal characteristics of the system to enhance specific propert...
| Autores: | , , , |
|---|---|
| Tipo de recurso: | artículo |
| Estado: | Versión publicada |
| Fecha de publicación: | 2025 |
| País: | España |
| Institución: | Universidad de Sevilla (US) |
| Repositorio: | idUS. Depósito de Investigación de la Universidad de Sevilla |
| OAI Identifier: | oai:idus.us.es:11441/174419 |
| Acceso en línea: | https://hdl.handle.net/11441/174419 https://doi.org/10.5802/crmeca.293 |
| Access Level: | acceso abierto |
| Palabra clave: | Size effect Particle-reinforced composites Spherical inhomogeneity Coupled criterion Finite fracture mechanics Experimental fracture mechanics Mecanique experimentale de la rupture Effet de taille Composites renforces par particules Inhomogeneite spherique Critere couple Mecanique de la rupture finie |
| Sumario: | Particle-reinforced composites are widely used in industry, primarily due to their versatile fabrication methods and the ability to tailor their properties. In many cases, extensive experimental campaigns are required to determine the optimal characteristics of the system to enhance specific properties. Micromechanical models can serve as a useful alternative or initial approach during the material design process. One of the easiest characteristics that can be modified is the size of the reinforcement, which, according to some models and preliminary evidence, can significantly affect the mechanical properties of the material. The objective of this work is to experimentally evaluate the size effect of reinforcement on the composite strength and to compare it with the predictions by the coupled criterion of finite fracture mechanics (CCFFM). A secondary objective is to visualize the initiation of the failure mechanism,which starts at the particlematrix interface and progresses toward a crack that splits the specimen. To achieve this, a new specimen design is proposed along with an optimized fabrication procedure. The tests were recorded using a highspeed camera, which allowed for the visualization of crack initiation at the particle-matrix interface. The experimental results show a strong size effect, where smaller particles correspond to higher apparent strength. The results are in relatively good agreement with the predictions of the CC-FFM. |
|---|