Design and implementation of rural microgrids : Laguna Grande case study
In 2015 the United Nations established the 17 Sustainable Development Goals: a set of interrelated objectives and a guide to reach a more sustainable and higher quality future for all humanity. The goals were set with a timeline for 2030, the seventh goal refers specifically to the universal access...
| Autor: | |
|---|---|
| Tipo de recurso: | tesis doctoral |
| Fecha de publicación: | 2022 |
| País: | España |
| Institución: | Universitat Politècnica de Catalunya (UPC) |
| Repositorio: | UPCommons. Portal del coneixement obert de la UPC |
| Idioma: | inglés |
| OAI Identifier: | oai:upcommons.upc.edu:2117/371622 |
| Acceso en línea: | https://hdl.handle.net/2117/371622 https://dx.doi.org/10.5821/dissertation-2117-371622 |
| Access Level: | acceso abierto |
| Palabra clave: | Àrees temàtiques de la UPC::Enginyeria electrònica |
| Sumario: | In 2015 the United Nations established the 17 Sustainable Development Goals: a set of interrelated objectives and a guide to reach a more sustainable and higher quality future for all humanity. The goals were set with a timeline for 2030, the seventh goal refers specifically to the universal access to “affordable and clean energy”. Taking account the considerable fraction of world population that do not have access to electricity, especially in rural areas, this goal still requires a great effort and investment. Rural hybrid microgrids, that integrate and manage solar and wind energy resources to provide electric service to remote locations, are a promising solution to reach this “last mile” scenario. However, as is reported in the literature, there is still scarce information about the performance of these systems based on measured data obtained in real working field conditions. This work aims to contribute to this aspect mainly by analyzing the data obtained in the 9 kW Laguna Grande community hybrid microgrid, which is cooperative since 2016 in the coast of Perú, and has been equipped with sensors and data acquisition systems that measure and register solar radiation, wind speed, temperatures, and all the relevant electric parameters. As a preliminary study, the rural electrification gap and costs are assessed, as well as the availability of solar and wind resources in the area of interest. A literature and state of the art review is undertaken followed by the definition of the microgrid concept and the different ways in which a rural microgrid can be configured. The particular way in which the Laguna Grande microgrid is configured and instrumented is described. Measured meteorological conditions as solar radiation, wind speed and temperature are analyzed and related to the power generated by the photovoltaic arrays and wind turbine. This in turn leads to a balance with respect to the power delivered to the community and consequently to the voltage levels of the battery bank. Battery dynamics concepts are used to determine the depth of discharge (DOD) of the batteries in a real time regime. The statistics of the DOD values allows for the duration of the battery to be estimated which is a key factor to the microgrid economics and reliability. A parametric study is done to assess the effect of varying battery size on the technical and economic performance of the microgrid; similarly, with generating capacity in both photovoltaic arrays and wind turbines. Complementarily, a commercial software is used to optimize the microgrid, introducing state of the art components as lithium-ion batteries, power electronics and photovoltaic modules for a future upgrade. Finally, this study would not be complete without emphasizing the importance and adequate consideration of the human factor for the success and long-term sustainability of rural electrification projects. |
|---|