The influence of gravity column continuity on the seismic performance of special steel moment frame structures
This paper investigates the influence of the stiffness and strength of gravity columns on the collapse performance of buildings that utilize steel special moment frames as the main seismic lateral load resisting system. The research centers on the development of a simple lumped column approach, wher...
| Autor: | |
|---|---|
| Tipo de recurso: | artículo |
| Estado: | Versión publicada |
| Fecha de publicación: | 2016 |
| País: | Ecuador |
| Institución: | Universidad de Cuenca |
| Repositorio: | Repositorio Universidad de Cuenca |
| OAI Identifier: | oai:dspace.ucuenca.edu.ec:123456789/29186 |
| Acceso en línea: | https://www.scopus.com/inward/record.uri?eid=2-s2.0-84949447794&doi=10.1016%2fj.jcsr.2015.11.010&partnerID=40&md5=8abfbc6d53677deb15d6b1002666c6a2 http://dspace.ucuenca.edu.ec/handle/123456789/29186 |
| Access Level: | acceso abierto |
| Palabra clave: | Collapse Probability Column Splices Continuous Stiffness Gravity Columns Gravity Framing Seismic Performance Steel Special Moment Frames |
| Sumario: | This paper investigates the influence of the stiffness and strength of gravity columns on the collapse performance of buildings that utilize steel special moment frames as the main seismic lateral load resisting system. The research centers on the development of a simple lumped column approach, where all the gravity columns are combined into one elastic, continuous, and pinned-base element. Once this approach was validated, 2-, 4- and 8-story buildings that were originally analyzed without the influence of gravity columns in the ATC 76-1 project were re-analyzed including gravity columns. The FEMA P-695 methodology was used to assess the collapse performance. The effect of having a different number of gravity columns and different column sections was modeled by varying the moment of inertia of the lumped gravity column. The results show that the gravity columns have a profound influence on the collapse performance of buildings, especially for taller structures. Moreover, it was found that the correlation between the results of the nonlinear static analyses and the nonlinear dynamic analysis, based on collapse evaluation, provides insight into the choice of an optimal section for the lumped column. This means, in turn, that the designer can determine the number and the size of gravity columns that are required to significantly improve the building's collapse performance. |
|---|