Mitigación del isi (interferencia intersimbólica) sobre un sistema wimax fijo
This article discusses possible solutions to mitigate the different types of fainting that occur in a multipath channel, which will be chosen for a specific scenario Fixed WiMAX system, where the main problem is to eliminate the ISI with the help of theoretical analysis and then implement optimal so...
| Autores: | , , |
|---|---|
| Formato: | artículo |
| Estado: | Versión publicada |
| Fecha de publicación: | 2010 |
| País: | Ecuador |
| Recursos: | Escuela Superior Politécnica del Litoral |
| Repositorio: | Repositorio Escuela Superior Politécnica del Litoral |
| Idioma: | español |
| OAI Identifier: | oai:www.dspace.espol.edu.ec:123456789/11032 |
| Acesso em linha: | http://www.dspace.espol.edu.ec/handle/123456789/11032 |
| Access Level: | acceso abierto |
| Palavra-chave: | WIMAX (WORLDWIDE INTEROPERABILITY FOR MICROWAVE ACCESS) OFDM RAYLEIGH DISTRIBUTION SNR (SIGNAL NOISE RATE) CP (CYCLIC PREFIX) ISI AND NLOS. |
| Resumo: | This article discusses possible solutions to mitigate the different types of fainting that occur in a multipath channel, which will be chosen for a specific scenario Fixed WiMAX system, where the main problem is to eliminate the ISI with the help of theoretical analysis and then implement optimal solutions, where we only focus on two solutions to be implemented in a software simulation using basic elements for a wireless communication system based on an OFDM system, which takes advantage of using the FFT / IFFT, also the data will be modulated and demodulated in 16QAM and 32QAM, to finally make a comparison between the data sent with data received at the output of the system, in order to obtain a measurement as is the bit error rate and finally draw conclusions from our analysis concerned. |
|---|