Application of Pb–Fe spinel-activated carbon for phenol removal from aqueous solutions: fixed-bed adsorption studies
Fixed-bed studies for phenol uptake from water were carried out using a novel Pb–Fe spinel-activated carbon adsorbent. A characterization phase including TGA, FTIR, SEM, and BET analyses was performed for the developed active carbon. In column studies, the influence of initial phenol concentration,...
| Autores: | , , , |
|---|---|
| Tipo de recurso: | artículo |
| Estado: | Versión borrador |
| Fecha de publicación: | 2023 |
| País: | Colombia |
| Institución: | Corporación Universidad de la Costa |
| Repositorio: | Repositorio REDICUC |
| Idioma: | inglés |
| OAI Identifier: | oai:repositorio.cuc.edu.co:11323/10394 |
| Acceso en línea: | https://hdl.handle.net/11323/10394 https://repositorio.cuc.edu.co/ |
| Access Level: | acceso embargado |
| Palabra clave: | Continuous adsorption Fixed-bed column Pb–Fe spinel-activated carbon Modeling Phenol |
| Sumario: | Fixed-bed studies for phenol uptake from water were carried out using a novel Pb–Fe spinel-activated carbon adsorbent. A characterization phase including TGA, FTIR, SEM, and BET analyses was performed for the developed active carbon. In column studies, the influence of initial phenol concentration, column bed height, and the solution flow rate was investigated at natural pH. Adsorption of phenol onto Pb–Fe spinel-activated carbon composite and pristine activated carbon was analyzed in the form of breakthrough curves. Under optimum conditions, the maximum adsorption capacities for the magnetic active carbon composite and pristine activated carbon were found to be 113.95 and 102.61 mg/g, respectively. Results indicated that the adsorption capacity of adsorbent for all examined conditions was higher than that obtained for unmodified activated carbon because the composite contains additional metal hydroxides compared with the pristine activated carbon. The Yoon and Nelson, Thomas, and instantaneous local equilibrium (ILE) models were used to explain column data collected under different operating conditions. Finally, the results of the continuous adsorption process were explained successfully using the Yoon–Nelson and Thomas models. Thus, the phenol adsorption on Pb-Fe@MAC was a feasible operation to be performed in fixed-bed mode. |
|---|