Mechanical and thermal performance of a geopolymeric and hybrid material based on fly ash
This article presents an evaluation of the thermal behavior of a hybrid (FA/OPC) and geopolymer (FA100) material. The FA100 system is based on fly ash (FA), which has an elevated content of unburned material (14.8%). The FA/OPC system is comprised of a mixture of fly ash and ordinary Portland cement...
| Autores: | , , |
|---|---|
| Tipo de recurso: | artículo |
| Estado: | Versión publicada |
| Fecha de publicación: | 2016 |
| País: | Colombia |
| Institución: | Universidad Nacional de Colombia |
| Repositorio: | Repositorio UN |
| Idioma: | español |
| OAI Identifier: | oai:repositorio.unal.edu.co:unal/60604 |
| Acceso en línea: | https://repositorio.unal.edu.co/handle/unal/60604 http://bdigital.unal.edu.co/58936/ |
| Access Level: | acceso abierto |
| Palabra clave: | 62 Ingeniería y operaciones afines / Engineering fly ash geopolymer hybrid material fire resistance |
| Sumario: | This article presents an evaluation of the thermal behavior of a hybrid (FA/OPC) and geopolymer (FA100) material. The FA100 system is based on fly ash (FA), which has an elevated content of unburned material (14.8%). The FA/OPC system is comprised of a mixture of fly ash and ordinary Portland cement (OPC) at a proportion of 80/20. The thermal performance was evaluated by several tests, such as exposure to high temperatures (up to1000°C) and direct flame resistance. In addition, the effect of cyclic exposure was studied at 700°C for 10 cycles. FA/OPC hybrid material retains 92% of its initial strength and FA100 retains 113.3% of its initial strength at 700°C. Both materials can withstand 10 exposure cycles with a strength loss of less than 45%. In direct flame exposure, a temperature gradient of about 500°C was observed. These results indicate that these types of materials could possibly be used as fire-resistant materials in civil structures. |
|---|