Static compensators assessment in the wind power systems transient stability with induction generators in distribution networks

ABSTRACT: Currently, most wind power plants use induction generators in their operation. Due to their nature, these generators are usually equipped either with static or dynamic compensation devices. This paper presents an assessment of the use of static compensators in the stability of wind inducti...

Descripción completa

Detalles Bibliográficos
Autores: Zapata, Luis, Velilla Hernández, Esteban, López Lezama, Jesús María
Tipo de recurso: artículo
Estado:Versión publicada
Fecha de publicación:2014
País:Colombia
Institución:Universidad de Antioquia
Repositorio:Repositorio UdeA
Idioma:inglés
OAI Identifier:oai:bibliotecadigital.udea.edu.co:10495/27988
Acceso en línea:http://hdl.handle.net/10495/27988
https://revistas.elpoli.edu.co/index.php/pol/article/view/474
Access Level:acceso abierto
Palabra clave:Energía eólica
Wind power
Maquinas eléctricas
Electric machines
compensadores estáticos
Static compensators
Descripción
Sumario:ABSTRACT: Currently, most wind power plants use induction generators in their operation. Due to their nature, these generators are usually equipped either with static or dynamic compensation devices. This paper presents an assessment of the use of static compensators in the stability of wind induction generators. To perform the study, a base case was used in which a three-phase fault that destabilizes the network is simulated. Then, to stabilize the network and avoid an eventual disconnection or damage of the wind power farm, three compensation alternatives were considered: capacitors, STATCOM and SVC. The effectiveness and performance of each of these alternatives were evaluated. Simulations were carried out in Simulink of MATLAB@, showing satisfactory results for the compensation alternatives under study. The performed simulations identified the STATCOM with IGBT as the most effective compensation under eventual contingencies. On the other hand, it was found that all the studied alternatives are equally effective for voltage compensation in steady state conditions.