Hyperbranched polyester polyol modified with polylactic acid as a compatibilizer for plasticized tapioca starch/polylactic acid blends

A hyperbranched polyester polyol of the second generation (HBP2) was modified with polylactic acid (HBP2-g-PLA) and employed as a compatibilizer for plasticized tapioca starch (TPS)/polylactic acid (PLA) blends. The effect of the compatibilizer HBP2- g-PLA was evaluated in comparison to the control...

Descripción completa

Detalles Bibliográficos
Autores: Murillo Ruiz, Edwin Alberto, Mesias Alvarez, Ricardo Esteban
Tipo de recurso: artículo
Estado:Versión publicada
Fecha de publicación:2018
País:Colombia
Institución:Universidad Francisco de Paula Santander
Repositorio:Repositorio Digital UFPS
Idioma:inglés
OAI Identifier:oai:repositorio.ufps.edu.co:ufps/1010
Acceso en línea:http://repositorio.ufps.edu.co/handle/ufps/1010
https://doi.org/10.1590/0104-1428.09516
Access Level:acceso abierto
Palabra clave:biodegradable polymers
hyperbranched polyester
compatibilization
thermoplastic starch/PLA blend
properties
Descripción
Sumario:A hyperbranched polyester polyol of the second generation (HBP2) was modified with polylactic acid (HBP2-g-PLA) and employed as a compatibilizer for plasticized tapioca starch (TPS)/polylactic acid (PLA) blends. The effect of the compatibilizer HBP2- g-PLA was evaluated in comparison to the control sample (TPS/PLA blend without HBP2-g-PLA). The torque value of the TPS/PLA blends with HBP2- g-PLA was lower than that of the control sample, while thermal stability and crystallinity followed opposite behavior. The glass transition temperature (Tg) and degree of crystallinity of the TPS/PLA blends with HBP2-g-PLA decreased with increasing mass fraction of HBP2-g-PLA. By scanning electron microscopy (SEM), it was observed that the morphology of the TPS/PLA blends with HBP2-g -PLA was more homogeneous than that of the control sample, confirming that HBP2- g-PLA acted as a compatibilizer and plasticizing agent to the TPS/PLA blends. Rheological analysis of the compatibilized TPS/PLA blends indicated the presence of microstructure.