Microwave assisted preparation of LiFePO4/C coated LiMn1.6Ni0.4O4 for Li-ion batteries with superior electrochemical properties
ABSTRACT: LiMn1.6Ni0.4O4 (LMNO) spinel is a promising cobalt-free electrode for high potential applications. However, its chemical stability against electrolytes is relatively poor. Inorganic coatings have widely used to achieve superior chemical and electrochemical properties. A promising example i...
| Autores: | , , , , , , , |
|---|---|
| Tipo de recurso: | artículo |
| Estado: | Versión publicada |
| Fecha de publicación: | 2022 |
| País: | Colombia |
| Institución: | Universidad de Antioquia |
| Repositorio: | Repositorio UdeA |
| Idioma: | inglés |
| OAI Identifier: | oai:bibliotecadigital.udea.edu.co:10495/32376 |
| Acceso en línea: | https://hdl.handle.net/10495/32376 |
| Access Level: | acceso abierto |
| Palabra clave: | Lithium ion batteries Microwave chemistry Olivine-spinel synchrotron high-temperature performance DFT interface modelling http://id.loc.gov/authorities/subjects/sh2011000687 |
| Sumario: | ABSTRACT: LiMn1.6Ni0.4O4 (LMNO) spinel is a promising cobalt-free electrode for high potential applications. However, its chemical stability against electrolytes is relatively poor. Inorganic coatings have widely used to achieve superior chemical and electrochemical properties. A promising example is LiFePO4/C (LFP/C) olivine coated LMNO spinel particles, in which olivine provides a high chemical stability. Chemical incompatibility between them during atmospheric synthesis conditions makes the process extremely challenging. Herein, we propose a simple and practical route to prepare LFP/C-coated LMNO using microwave irradiation. This process significantly improves the crystallographic order of the spinel structure and provides sufficient physical interaction between both materials while avoiding side reactions. Li-ion battery using LFP/C-coated LMNO electrode exhibits a higher discharge capacity at 25°C and 60°C than those of uncoated spinel. Moreover, cyclability (up to 500 cycles) at 25°C and C-rate capability performances at 60°C are superior in LFP/C-coated LMNO particles and not possible using uncoated spinel. |
|---|