Influence of grinding on the pozzolanic activity of granite residue.
This study explores the potential of the granite residue to be applied as a supplementary cementitious material. Furthermore, the efficiency of grinding methods in the improvement of the residue reactivity was also evaluated. The granite residue was collected in a facility located in Brazil and used...
| Autores: | , , , , |
|---|---|
| Tipo de recurso: | artículo |
| Estado: | Versión publicada |
| Fecha de publicación: | 2019 |
| País: | Brasil |
| Institución: | Universidade Federal de Ouro Preto (UFOP) |
| Repositorio: | Repositório Institucional da UFOP |
| Idioma: | inglés |
| OAI Identifier: | oai:repositorio.ufop.br:123456789/12412 |
| Acceso en línea: | http://www.repositorio.ufop.br/handle/123456789/12412 https://doi.org/10.1590/0370-44672019720004 |
| Access Level: | acceso abierto |
| Palabra clave: | Supplementary cementitious materials |
| Sumario: | This study explores the potential of the granite residue to be applied as a supplementary cementitious material. Furthermore, the efficiency of grinding methods in the improvement of the residue reactivity was also evaluated. The granite residue was collected in a facility located in Brazil and used as a Portland cement replacement with a substitution rate of 25% in mass. The residue was submitted to wet, dry and additive dry grinding methods, with several different times. The cement-based composites were characterized by quantitative X-Ray diffraction using the Rietveld's method, thermogravimetric analysis, and compressive strength. In conclusion, there was observed a higher efficiency of the wet grinding method, followed by an increase in compressive strength results as grinding time increased. Furthermore, the portlandite content was lower in the cement-based composite with granite residue, especially in the samples ground for 60, 120, and 180 minutes; a fact that summed up with other results for the pozzolanic potential of the granite residue. |
|---|