Effect of thermal aging on the microstructure and mechanical properties of stainless steel UNS S31803.

Duplex stainless steel UNS S31803 exhibits high mechanical strength with high corrosion properties, due to its microstructure composed of ferrite and austenite phases, in equal proportion. When the UNS S31803 steel is submitted to high temperatures, some precipitations can occur, such as nitrites, c...

Descripción completa

Detalles Bibliográficos
Autores: Costa, Junia Maria Gândara, Lacerda, José Carlos de, Godefroid, Leonardo Barbosa, Cândido, Luiz Cláudio
Tipo de recurso: artículo
Estado:Versión publicada
Fecha de publicación:2020
País:Brasil
Institución:Universidade Federal de Ouro Preto (UFOP)
Repositorio:Repositório Institucional da UFOP
Idioma:inglés
OAI Identifier:oai:repositorio.ufop.br:123456789/16920
Acceso en línea:http://www.repositorio.ufop.br/jspui/handle/123456789/16920
https://doi.org/10.1590/S1517-707620220001.1328
Access Level:acceso abierto
Palabra clave:Duplex stainless steel
Embrittlement
Sigma phase
Mechanical properties
Descripción
Sumario:Duplex stainless steel UNS S31803 exhibits high mechanical strength with high corrosion properties, due to its microstructure composed of ferrite and austenite phases, in equal proportion. When the UNS S31803 steel is submitted to high temperatures, some precipitations can occur, such as nitrites, carbides, and third phases (e.g. sigma phase -σ, and alpha prime - α'). These phases are deleterious in relation to the mechanical properties and corrosion resistance, and their effects are analyzed regarding the properties of the steel. In order to evaluate the precipitation of this deleterious phase, isothermal treatment was done at 500°C for 144 hours (α' phase) and at 850ºC for 80 minutes (σ phase). The results were obtained through the microstructural analysis and tensile tests. The presence of sigma phase was verified in the grain boundary, an increase in the mechanical resistance with a loss of toughness. There was as well as an increase in mechanical resistance with the precipitation of α', with less loss of ductility than that observed in the experiments involving the presence of sigma phase.