On the detailed design of a quasi-zero stiffness device to assist in the realisation of a translational Lanchester damper
A translational Lanchester damper is a device that adds damping to a structure at a point using a series combination of a viscous damper and a mass. The problem in the practical realisation of such a device is that a stiffness is required to support the mass, which changes the dynamic behaviour of t...
| Autores: | , , , |
|---|---|
| Tipo de recurso: | artículo |
| Estado: | Versión publicada |
| Fecha de publicación: | 2022 |
| País: | Brasil |
| Institución: | Universidade Estadual Paulista (UNESP) |
| Repositorio: | Repositório Institucional da UNESP |
| Idioma: | inglés |
| OAI Identifier: | oai:repositorio.unesp.br:11449/222226 |
| Acceso en línea: | http://dx.doi.org/10.1016/j.ymssp.2021.108258 http://hdl.handle.net/11449/222226 |
| Access Level: | acceso abierto |
| Palabra clave: | Essentially nonlinear stiffness High-static-low-dynamic-stiffness Nonlinear energy sink Passive vibration control Vibration absorber Vibration isolator Vibration neutraliser |
| Sumario: | A translational Lanchester damper is a device that adds damping to a structure at a point using a series combination of a viscous damper and a mass. The problem in the practical realisation of such a device is that a stiffness is required to support the mass, which changes the dynamic behaviour of the device, introducing a resonance frequency due to the interaction of the stiffness and inertia forces. This is a dynamic vibration absorber. To achieve a device that behaves broadly as a Lanchester damper rather than a dynamic vibration absorber, a very low stiffness is required, and this is the focus of this paper. The low stiffness is realised using a combination of linear springs and rigid links arranged with specific geometry into a compact device. Although the geometric configuration of the components leads to an inherently nonlinear device, the aim is to limit its working condition and exploit the linear-like behaviour. To this end, how the geometry affects the nonlinear behaviour is studied in detail, providing general guidelines for its design. A prototype Lanchester damper incorporating the low stiffness element was manufactured and tested on a single mode and two multi-modal vibrating structures. |
|---|