Effect of axial loads on implant-supported partial fixed prostheses by strain gauge analysis

OBJECTIVES: The present study used strain gauge analysis to perform an in vitro evaluation of the effect of axial loading on 3 elements of implant-supported partial fixed prostheses, varying the type of prosthetic cylinder and the loading points. MATERIAL AND METHODS: Three internal hexagon implants...

ver descrição completa

Detalhes bibliográficos
Autores: Vasconcellos, Luis Gustavo Oliveira de, Nishioka, Renato Sussumu, Vasconcellos, Luana Marotta Reis de, Nishioka, Lea Nogueira Braulino de Melo
Formato: artículo
Estado:Versión publicada
Fecha de publicación:2011
País:Brasil
Recursos:Universidade de São Paulo (USP)
Repositorio:Journal of applied oral science (Online)
Idioma:inglés
OAI Identifier:oai:revistas.usp.br:article/3962
Acesso em linha:https://www.revistas.usp.br/jaos/article/view/3962
Access Level:acceso abierto
Palavra-chave:Biomechanics
Dental implants
Dental prosthesis
Implant-supported dental prosthesis
Descrição
Resumo:OBJECTIVES: The present study used strain gauge analysis to perform an in vitro evaluation of the effect of axial loading on 3 elements of implant-supported partial fixed prostheses, varying the type of prosthetic cylinder and the loading points. MATERIAL AND METHODS: Three internal hexagon implants were linearly embedded in a polyurethane block. Microunit abutments were connected to the implants applying a torque of 20 Ncm, and prefabricated Co-Cr cylinders and plastic prosthetic cylinders were screwed onto the abutments, which received standard patterns cast in Co-Cr alloy (n=5). Four strain gauges (SG) were bonded onto the surface of the block tangentially to the implants, SG 01 mesially to implant 1, SG 02 and SG 03 mesially and distally to implant 2, respectively, and SG 04 distally to implant 3. Each metallic structure was screwed onto the abutments with a 10 Ncm torque and an axial load of 30 kg was applied at five predetermined points (A, B, C, D, E). The data obtained from the strain gauge analyses were analyzed statistically by RM ANOVA and Tukey's test, with a level of significance of p