Photoelectrocatalytic performance of nanostructured p-n junction NtTiO2/NsCuO electrode in the selective conversion of CO2 to methanol at low bias potentials
Aiming a selective reduction of CO2 to methanol, a p-n junction semiconductor was constructed based on CuO nanospheres (NsCuO) deposited at TiO2 nanotubes (NtTiO2). The NtTiO2/NsCuO material demonstrated smaller charge transfer resistance, smaller flat band potential and wider optical absorption whe...
| Autores: | , , |
|---|---|
| Tipo de recurso: | artículo |
| Estado: | Versión publicada |
| Fecha de publicación: | 2018 |
| País: | Brasil |
| Institución: | Universidade Estadual Paulista (UNESP) |
| Repositorio: | Repositório Institucional da UNESP |
| Idioma: | inglés |
| OAI Identifier: | oai:repositorio.unesp.br:11449/179436 |
| Acceso en línea: | http://dx.doi.org/10.1016/j.jcou.2017.12.008 http://hdl.handle.net/11449/179436 |
| Access Level: | acceso abierto |
| Palabra clave: | CO2 reduction Methanol formation Nanostructured NtTiO2/NsCuO semiconductor p-n junction Photoelectrocatalysis mechanism |
| Sumario: | Aiming a selective reduction of CO2 to methanol, a p-n junction semiconductor was constructed based on CuO nanospheres (NsCuO) deposited at TiO2 nanotubes (NtTiO2). The NtTiO2/NsCuO material demonstrated smaller charge transfer resistance, smaller flat band potential and wider optical absorption when compared with NtTiO2 and/or Ti/TiO2 nanoparticles coated by higher size particles of CuO (Ti/TiO2/CuO). The selective reduction of dissolved CO2 to methanol was promoted at lower potential of +0.2 V and UV–vis irradiation in 0.1 mol L−1 K2SO4 electrolyte pH 8 with 57% of faradaic efficiency. Even though the performance of the nanostructured material NtTiO2/NsCuO was similar to the non-completely nanostructured material Ti/TiO2/CuO (0.1 mmol L−1 methanol), the conversion to methanol has been significantly increased when hydroxyls (0.62 mmol L−1) and holes scavengers (0.71 mmol L−1), such as p-nitrosodimethylaniline (RNO) or glucose, respectively, were added in the supporting electrolyte. It indicates that photogenerated electron/hole pairs are spatially separated on p-n junction electrodes, which produces effective electrons and long-life holes, influencing the products formed in the reaction. A schematic representation of the heterojunction effect on the photoelectrocatalytic CO2 reduction is proposed under the semiconductor and each supporting electrolyte, which improves the knowledge about the subject. |
|---|