Tool wear and chip analysis after the hard turning of AISI D6 steel assisted by LN2
Sustainability is a concept which is widely considered now-adays, including in factories where machining operations are present. The search for methods able to improve the performance of industrial processes without damaging the environment or the worker’s health has been the main goal of several in...
| Autores: | , , , |
|---|---|
| Tipo de documento: | artigo |
| Estado: | Versão publicada |
| Data de publicação: | 2019 |
| País: | Brasil |
| Recursos: | Universidade Federal do Rio Grande do Norte (UFRN) |
| Repositório: | Repositório Institucional da UFRN |
| Idioma: | inglês |
| OAI Identifier: | oai:repositorio.ufrn.br:123456789/32344 |
| Acesso em linha: | https://repositorio.ufrn.br/handle/123456789/32344 |
| Access Level: | Acceso aberto |
| Palavra-chave: | Cryogenic machining Hard turning AISI D6 tool steel PCBN Tool wear Chip morphology |
| Resumo: | Sustainability is a concept which is widely considered now-adays, including in factories where machining operations are present. The search for methods able to improve the performance of industrial processes without damaging the environment or the worker’s health has been the main goal of several investigations. In this context, cryogenic machining is a technique that has been studied as an alternative to the use of mineral oil-based cutting fluids, mainly in the machining of titanium and nickel alloys. Investigations on the cryogenic machining of hard tool steels are still scarce in the literature. This article presents results from a series of turning trials under dry and cryogenic conditions using a hardened AISI D6 tool steel bar (57 HRC) as the workpiece. For the cryogenic machining tests, liquid nitrogen was delivered to the flank face, rake face and on both faces of PCBN inserts. The main cutting parameters (cutting speed, feed rate, and depth of cut) were kept constant during the trials. Tool wear and chip morphology were the output variables studied. The results show that the liquid nitrogen was able to reduce the cutting tool wear, providing a tool lifetime around 50% longer compared with the dry process. Moreover, the frequency of chip segmentation was diminished under cryogenic conditions in comparison with the dry process |
|---|