Análise eletromagnética de cabos OPGW utilizando métodos numérico e analítico
This work presents an electromagnetic study of OPGW cables (OpticalGround Wire), which have the dual function of lightning protection for high voltage transmission lines and communications channel through the optical fibers embedded in the cable structure. Lightning or short-circuit could compromise...
| Autor: | |
|---|---|
| Tipo de recurso: | tesis de maestría |
| Estado: | Versión publicada |
| Fecha de publicación: | 2008 |
| País: | Brasil |
| Institución: | Universidade Federal do Pará (UFPA) |
| Repositorio: | Repositório Institucional da UFPA |
| Idioma: | portugués |
| OAI Identifier: | oai:repositorio.ufpa.br:2011/2055 |
| Acceso en línea: | http://www.repositorio.ufpa.br:8080/jspui/handle/2011/2055 |
| Access Level: | acceso abierto |
| Palabra clave: | CNPQ::ENGENHARIAS::ENGENHARIA ELETRICA::TELECOMUNICACOES::TEORIA ELETROMAGNETICA, MICROONDAS, PROPAGACAO DE ONDAS, ANTENAS Cabo OPGW (Fio de aterramento ótico ) Densidade de corrente Efeito pelicular Efeito de proximidade OPGW cable Current density Skin effect Proximity effect |
| Sumario: | This work presents an electromagnetic study of OPGW cables (OpticalGround Wire), which have the dual function of lightning protection for high voltage transmission lines and communications channel through the optical fibers embedded in the cable structure. Lightning or short-circuit could compromise the cable’s integrity due to heating in the regions where there is greater concentration of current. For the analysis of this problem lectromagnetic calculations were made relating them to thermal effects on the cable. In this analysis three different geometries were considered, a model of the real cable, a model of the cable with homogeneous layers, and a model of the cable with modified layer, where the modification is related the geometric shape of the armor wires of the cable. The tools used in this study here the commercial software FEMLAB Multiphysics, based on the finite element method, and an analytical model developed from Maxwell’s equations in the frequency domain, which was implemented using the software MATLAB. The main results of this work are current density distribution plots on the cross section considering different frequencies and the analysis of the skin and proximity effects. |
|---|