Capture of CO2 by vermiculite impregnated with CaO.
Vermiculite samples were impregnated with different amounts of calcium oxide by the con- ventional thermal heating technique and subject to CO2 capture experiments in thermal analysis equipment. The amount of CO2 captured by calcium oxide increased from 13 g of CO2 per mol of CaO to 16.8 g of CO2 pe...
| Autores: | , , , , |
|---|---|
| Tipo de recurso: | artículo |
| Estado: | Versión publicada |
| Fecha de publicación: | 2022 |
| País: | Brasil |
| Institución: | Universidade Federal de Ouro Preto (UFOP) |
| Repositorio: | Repositório Institucional da UFOP |
| Idioma: | inglés |
| OAI Identifier: | oai:repositorio.ufop.br:123456789/15593 |
| Acceso en línea: | http://www.repositorio.ufop.br/jspui/handle/123456789/15593 https://doi.org/10.1080/17583004.2021.2023050 |
| Access Level: | acceso abierto |
| Palabra clave: | Calcium oxide Isoconversional Method Kinetics |
| Sumario: | Vermiculite samples were impregnated with different amounts of calcium oxide by the con- ventional thermal heating technique and subject to CO2 capture experiments in thermal analysis equipment. The amount of CO2 captured by calcium oxide increased from 13 g of CO2 per mol of CaO to 16.8 g of CO2 per mol of CaO when the experiments were carried out with pure calcium oxide and vermiculite impregnated with CaO (1:1), respectively. Integral isoconversional methods of Kissinger-Akahira-Sunose (KAS) and Osawa-Flynn-Wall (OFW) were used for the kinetic study of the process and good correlation coefficients were achieved. The apparent activation energy values showed that for low conversions (a < 0.3) the controlling step of the process is a mixed step where the chemical reaction and the dif- fusion of the reagents into the vermiculite have rates of the same order of magnitude (20 kJ < Ea < 40 kJ). For higher conversions values (a > 0.3) the apparent activation energy values suggest that the slow step is a chemical step (Ea> 40 kJ). |
|---|