On the number of cells for flexural vibration suppression in periodic beams
Vibration suppression is an important topic for many engineering applications. There are different techniques, typically involving passive and active controllers. However, it can alternatively be obtained by designing structures based on the concept of periodicity, which involves identical elements...
| Autores: | , , , , |
|---|---|
| Formato: | artículo |
| Estado: | Versión publicada |
| Fecha de publicación: | 2021 |
| País: | Brasil |
| Recursos: | Universidade Estadual Paulista (UNESP) |
| Repositorio: | Repositório Institucional da UNESP |
| Idioma: | inglés |
| OAI Identifier: | oai:repositorio.unesp.br:11449/221908 |
| Acesso em linha: | http://dx.doi.org/10.1007/s11012-021-01399-z http://hdl.handle.net/11449/221908 |
| Access Level: | acceso abierto |
| Palavra-chave: | Flexural waves Number of cells Periodic beams Stop band Vibration suppression |
| Resumo: | Vibration suppression is an important topic for many engineering applications. There are different techniques, typically involving passive and active controllers. However, it can alternatively be obtained by designing structures based on the concept of periodicity, which involves identical elements or parts connected repeatedly. Periodic structures are designed to exhibit stop bands for a pre-defined range of frequency. The stop bands introduce an effect similar to the filter. In this context, this article presents a modeling for designing periodic beams. The approach considers a beam with a periodic part, and two homogeneous (not periodic) connected in both left and right-hand sides of the periodic part. The results demonstrate that five periodic cells generate an effect equivalent to an infinite periodic beam, in terms of flexural vibration suppression. |
|---|