Influence of the addition of glass fibers reinforcements in the flexural strength of acrylic resin
Objective: To evaluate the influence of glass fiber reinforcements used in nautical and sports products on the flexural strength of acrylic resin. Materials and methods: Thirty thermoactivated acrylic resin bars (25 x 10.5 x 3.3 mm) were used. The samples were shared in 3 groups: bars with no glass...
| Autores: | , , , , , |
|---|---|
| Tipo de recurso: | artículo |
| Estado: | Versión publicada |
| Fecha de publicación: | 2020 |
| País: | Brasil |
| Institución: | Universidade Estadual Paulista (UNESP) |
| Repositorio: | Repositório Institucional da UNESP |
| Idioma: | inglés |
| OAI Identifier: | oai:repositorio.unesp.br:11449/200681 |
| Acceso en línea: | http://dx.doi.org/10.14295/bds.2020.v23i3.1955 http://hdl.handle.net/11449/200681 |
| Access Level: | acceso abierto |
| Palabra clave: | Dentures Flexural strength Water sports |
| id |
BR_366ef2b2d060b301c6c879503dc95ac6 |
|---|---|
| oai_identifier_str |
oai:repositorio.unesp.br:11449/200681 |
| network_acronym_str |
BR |
| network_name_str |
Brasil |
| repository_id_str |
|
| spelling |
Influence of the addition of glass fibers reinforcements in the flexural strength of acrylic resinInfluência da adição de reforço de fibra de vidro na resistência flexural de resina acrílicaDenturesFlexural strengthWater sportsObjective: To evaluate the influence of glass fiber reinforcements used in nautical and sports products on the flexural strength of acrylic resin. Materials and methods: Thirty thermoactivated acrylic resin bars (25 x 10.5 x 3.3 mm) were used. The samples were shared in 3 groups: bars with no glass fiber (control group, n = 10), bars reinforced with glass fiber and 0.18 mm thickness (group F1, n = 10) and bars reinforced with glass fiber and 0.80 mm thickness (group F2, n = 10). After 48 hours, samples were submitted to compression test in order to evaluate flexural strength. Obtained data were statistically analyzed with significance level of 5 %. Results: It was observed that the use of glass fiber effectively increased the flexural strength compared to the control group; the thickness of the glass fiber, however, did not present statistical differences. Conclusion: The use of fiber glass is a simple and cost-effective alternative to improve acrylic resin performance.Unesp – Univ Estadual Paulista Institute of Science and Tecnologia São José dos Campos – Department of Dental Materials and ProsthodonticsSão Lucas College Department of OdontologyUnesp – Univ Estadual Paulista Institute of Science and Tecnologia São José dos Campos – Department of Dental Materials and ProsthodonticsUniversidade Estadual Paulista (Unesp)São Lucas College2020-12-12T02:13:13Z2020-12-12T02:13:13Z2020-07-01info:eu-repo/semantics/publishedVersioninfo:eu-repo/semantics/article1-5http://dx.doi.org/10.14295/bds.2020.v23i3.1955Brazilian Dental Science, v. 23, n. 3, p. 1-5, 2020.2178-6011http://hdl.handle.net/11449/20068110.14295/bds.2020.v23i3.19552-s2.0-85087295617Scopusreponame:Repositório Institucional da UNESPinstname:Universidade Estadual Paulista (UNESP)instacron:UNESPengBrazilian Dental Scienceinfo:eu-repo/semantics/openAccessPossari, João Gabriel Ezequiel [UNESP]Sacorague, Samia Cristina Mota [UNESP]Feitosa, Fernanda AlvesPenteado, Marcela Moreira [UNESP]Sichi, Luigi Giovanni Bernardo [UNESP]de ARAÚJO, Rodrigo Máximo [UNESP]2024-11-18T13:35:14Zoai:repositorio.unesp.br:11449/200681Repositório InstitucionalPUBhttp://repositorio.unesp.br/oai/requestrepositoriounesp@unesp.bropendoar:29462024-11-18T13:35:14Repositório Institucional da UNESP - Universidade Estadual Paulista (UNESP)false |
| dc.title.none.fl_str_mv |
Influence of the addition of glass fibers reinforcements in the flexural strength of acrylic resin Influência da adição de reforço de fibra de vidro na resistência flexural de resina acrílica |
| title |
Influence of the addition of glass fibers reinforcements in the flexural strength of acrylic resin |
| spellingShingle |
Influence of the addition of glass fibers reinforcements in the flexural strength of acrylic resin Possari, João Gabriel Ezequiel [UNESP] Dentures Flexural strength Water sports |
| title_short |
Influence of the addition of glass fibers reinforcements in the flexural strength of acrylic resin |
| title_full |
Influence of the addition of glass fibers reinforcements in the flexural strength of acrylic resin |
| title_fullStr |
Influence of the addition of glass fibers reinforcements in the flexural strength of acrylic resin |
| title_full_unstemmed |
Influence of the addition of glass fibers reinforcements in the flexural strength of acrylic resin |
| title_sort |
Influence of the addition of glass fibers reinforcements in the flexural strength of acrylic resin |
| dc.creator.none.fl_str_mv |
Possari, João Gabriel Ezequiel [UNESP] Sacorague, Samia Cristina Mota [UNESP] Feitosa, Fernanda Alves Penteado, Marcela Moreira [UNESP] Sichi, Luigi Giovanni Bernardo [UNESP] de ARAÚJO, Rodrigo Máximo [UNESP] |
| author |
Possari, João Gabriel Ezequiel [UNESP] |
| author_facet |
Possari, João Gabriel Ezequiel [UNESP] Sacorague, Samia Cristina Mota [UNESP] Feitosa, Fernanda Alves Penteado, Marcela Moreira [UNESP] Sichi, Luigi Giovanni Bernardo [UNESP] de ARAÚJO, Rodrigo Máximo [UNESP] |
| author_role |
author |
| author2 |
Sacorague, Samia Cristina Mota [UNESP] Feitosa, Fernanda Alves Penteado, Marcela Moreira [UNESP] Sichi, Luigi Giovanni Bernardo [UNESP] de ARAÚJO, Rodrigo Máximo [UNESP] |
| author2_role |
author author author author author |
| dc.contributor.none.fl_str_mv |
Universidade Estadual Paulista (Unesp) São Lucas College |
| dc.subject.por.fl_str_mv |
Dentures Flexural strength Water sports |
| topic |
Dentures Flexural strength Water sports |
| description |
Objective: To evaluate the influence of glass fiber reinforcements used in nautical and sports products on the flexural strength of acrylic resin. Materials and methods: Thirty thermoactivated acrylic resin bars (25 x 10.5 x 3.3 mm) were used. The samples were shared in 3 groups: bars with no glass fiber (control group, n = 10), bars reinforced with glass fiber and 0.18 mm thickness (group F1, n = 10) and bars reinforced with glass fiber and 0.80 mm thickness (group F2, n = 10). After 48 hours, samples were submitted to compression test in order to evaluate flexural strength. Obtained data were statistically analyzed with significance level of 5 %. Results: It was observed that the use of glass fiber effectively increased the flexural strength compared to the control group; the thickness of the glass fiber, however, did not present statistical differences. Conclusion: The use of fiber glass is a simple and cost-effective alternative to improve acrylic resin performance. |
| publishDate |
2020 |
| dc.date.none.fl_str_mv |
2020-12-12T02:13:13Z 2020-12-12T02:13:13Z 2020-07-01 |
| dc.type.status.fl_str_mv |
info:eu-repo/semantics/publishedVersion |
| dc.type.driver.fl_str_mv |
info:eu-repo/semantics/article |
| format |
article |
| status_str |
publishedVersion |
| dc.identifier.uri.fl_str_mv |
http://dx.doi.org/10.14295/bds.2020.v23i3.1955 Brazilian Dental Science, v. 23, n. 3, p. 1-5, 2020. 2178-6011 http://hdl.handle.net/11449/200681 10.14295/bds.2020.v23i3.1955 2-s2.0-85087295617 |
| url |
http://dx.doi.org/10.14295/bds.2020.v23i3.1955 http://hdl.handle.net/11449/200681 |
| identifier_str_mv |
Brazilian Dental Science, v. 23, n. 3, p. 1-5, 2020. 2178-6011 10.14295/bds.2020.v23i3.1955 2-s2.0-85087295617 |
| dc.language.iso.fl_str_mv |
eng |
| language |
eng |
| dc.relation.none.fl_str_mv |
Brazilian Dental Science |
| dc.rights.driver.fl_str_mv |
info:eu-repo/semantics/openAccess |
| eu_rights_str_mv |
openAccess |
| dc.format.none.fl_str_mv |
1-5 |
| dc.source.none.fl_str_mv |
Scopus reponame:Repositório Institucional da UNESP instname:Universidade Estadual Paulista (UNESP) instacron:UNESP |
| instname_str |
Universidade Estadual Paulista (UNESP) |
| instacron_str |
UNESP |
| institution |
UNESP |
| reponame_str |
Repositório Institucional da UNESP |
| collection |
Repositório Institucional da UNESP |
| repository.name.fl_str_mv |
Repositório Institucional da UNESP - Universidade Estadual Paulista (UNESP) |
| repository.mail.fl_str_mv |
repositoriounesp@unesp.br |
| _version_ |
1853671944461746176 |
| score |
15.300719 |