Use of malt bagasse as na adsorbent for the removal of the methylene blue dye

Malt bagasse is a viable alternative to be used as an adsorbent, as it is produced in large quantities during the beer production process. The present study aimed to evaluate the percentage of removal of the methylene blue content in synthetic effluent using malt bagasse as an adsorbent. The materia...

Descripción completa

Detalles Bibliográficos
Autores: Correia, Larissa Fernandes, Barros, José Marcelo Honório Ferreira, Fernandes, Alexsandro Marinho, Clericuzi, Genaro Zenaide, Sousa, Karla Silvana Menezes Gadelha de
Tipo de recurso: artículo
Estado:Versión publicada
Fecha de publicación:2020
País:Brasil
Institución:Universidade Federal de Itajubá (UNIFEI)
Repositorio:Research, Society and Development
Idioma:portugués
OAI Identifier:oai:ojs.pkp.sfu.ca:article/7781
Acceso en línea:https://rsdjournal.org/index.php/rsd/article/view/7781
Access Level:acceso abierto
Palabra clave:Adsorção
Bioadsorventes
Efluente têxtil
Indústria cervejeira.
Adsorción
Bioadsorbers
Efluente textil
Industria cervecera.
Adsorption
Textile effluent
Brewing industry.
Descripción
Sumario:Malt bagasse is a viable alternative to be used as an adsorbent, as it is produced in large quantities during the beer production process. The present study aimed to evaluate the percentage of removal of the methylene blue content in synthetic effluent using malt bagasse as an adsorbent. The material was characterized by particle size analysis, X-ray diffraction (XRD), infrared spectroscopy with Fourier transform (FT-IR), and thermogravimetric analysis (TGA). The experiments were carried out based on a 2³ experimental plan with three replicates at the central point. There were three independent variables: methylene blue concentration (40, 60, and 80 mg / L), pH (6, 7, and 8) and time (4, 5, and 6 hours). The best conditions were obtained through the treatment of experimental data in the software Statistica 13.0. The bagasse had a removal percentage of approximately 94% for the highest concentration level (80 mg / L), lowest pH level (6), and the shortest time (4 hours). Thus, malt bagasse is efficient in removing methylene blue in synthetic effluent, so it is an alternative because it is also economically viable.