Using Proton Nuclear Magnetic Resonance (NMR) as a calibrating reference for magnetic field measurement instruments: Sensitive volume and magnetic field homogeneity
Nuclear magnetic resonance can be conveniently used to set up reference values of magnetic flux densities for the calibration of measurement instrumentation. Two measurement procedures are proposed based on the Fourier analysis of the nuclear magnetic signal. Particularly, we consider the situation...
| Autores: | , , |
|---|---|
| Tipo de documento: | artigo |
| Estado: | Versão publicada |
| Data de publicação: | 2020 |
| País: | Argentina |
| Recursos: | Consejo Nacional de Investigaciones Científicas y Técnicas |
| Repositório: | CONICET Digital (CONICET) |
| Idioma: | inglês |
| OAI Identifier: | oai:ri.conicet.gov.ar:11336/124391 |
| Acesso em linha: | http://hdl.handle.net/11336/124391 |
| Access Level: | Acceso aberto |
| Palavra-chave: | MAGNETIC FIELD COMPENSATION MAGNETIC FIELD MEASUREMENT METROLOGY NMR https://purl.org/becyt/ford/1.3 https://purl.org/becyt/ford/1 |
| Resumo: | Nuclear magnetic resonance can be conveniently used to set up reference values of magnetic flux densities for the calibration of measurement instrumentation. Two measurement procedures are proposed based on the Fourier analysis of the nuclear magnetic signal. Particularly, we consider the situation where the reference magnetic flux density may change its value across the sensor active area/volume due to spatial inhomogeneities. An explored potential solution uses an electronic compensation system in order to minimize the spatial inhomogeneities of the magnetic flux density within the calibrating volume. For this purpose, a previously designed device was added to the magnetic resonance apparatus. Both methods allow a performance better than 10 ppm in calibrating measurements by using a magnetic flux density source of the order of 100 ppm in spatial homogeneity within the calibrating volume. Examples of both methods are discussed. |
|---|