Speciation analysis of thallium using electrothermal AAS following on-line pre-concentration in a microcolumn filled with multiwalled carbon nanotubes

The enrichment ability of carbon nanotubes (CNTs) was investigated and a new method established for the determination of trace thallium species in environmental samples using electrothermal atomization-atomic absorption spectrometry (ETAAS). The CNTs were employed as sorbent substrate in a continuou...

Descripción completa

Detalles Bibliográficos
Autores: Gil, Raul Andres, Pacheco, Pablo Hugo, Smichowski, Patricia Nora, Olsina, Roberto Antonio, Martinez, Luis Dante
Tipo de recurso: artículo
Estado:Versión publicada
Fecha de publicación:2009
País:Argentina
Institución:Consejo Nacional de Investigaciones Científicas y Técnicas
Repositorio:CONICET Digital (CONICET)
Idioma:inglés
OAI Identifier:oai:ri.conicet.gov.ar:11336/92871
Acceso en línea:http://hdl.handle.net/11336/92871
Access Level:acceso abierto
Palabra clave:MULTIWALLED CARBON NANOTUBES
ON-LINE SOLID PHASE EXTRACTION
STPF-ETAAS
THALLIUM SPECIATION
https://purl.org/becyt/ford/1.4
https://purl.org/becyt/ford/1
Descripción
Sumario:The enrichment ability of carbon nanotubes (CNTs) was investigated and a new method established for the determination of trace thallium species in environmental samples using electrothermal atomization-atomic absorption spectrometry (ETAAS). The CNTs were employed as sorbent substrate in a continuous flow system coupled to ETAAS. Parameters influencing the recoveries of thallium were optimized. Under optimal conditions, the detection limit and precision of the method were 0. 009 μg L-1 and 3. 9%, respectively. The method was applied to the determination of thallium in real environmental samples and the recoveries were in the range from 96 to 100%. This system was able to separate thallium (I) from the matrix, which allowed its selective determination. The total thallium content was then determined by reducing Tl(III) with hydroxylamine. All these experimental results indicated that this new procedure can be applied to the determination of trace thallium in drinking water samples.