An Efficient Polymer Inclusion Membrane-Based Device for Cd Monitoring in Seawater

A novel and simple device that includes a polymer inclusion membrane (PIM) has been prepared and tested for the first time to detect low concentration levels of cadmium in seawater. The ionic liquid trihexyl (tetradecyl) phosphonium chloride (THTDPCl) has been shown to be an effective extractant whe...

ver descrição completa

Detalhes bibliográficos
Autores: Khaldoun, Ibrahim Ait, Mitiche, Lynda, Sahmoune, Amar, Fontàs Rigau, Clàudia
Formato: artículo
Estado:Versión publicada
Fecha de publicación:2018
País:España
Recursos:Varias* (Consorci de Biblioteques Universitáries de Catalunya, Centre de Serveis Científics i Acadèmics de Catalunya)
Repositorio:Recercat. Dipósit de la Recerca de Catalunya
OAI Identifier:oai:recercat.cat:10256/15792
Acesso em linha:http://hdl.handle.net/10256/15792
Access Level:acceso abierto
Palavra-chave:Membranes (Tecnologia)
Membranes (Technology)
Separació (Tecnologia)
Separation (Technology)
Aigua de mar
Seawater
Cadmi
Cadmium
Descrição
Resumo:A novel and simple device that includes a polymer inclusion membrane (PIM) has been prepared and tested for the first time to detect low concentration levels of cadmium in seawater. The ionic liquid trihexyl (tetradecyl) phosphonium chloride (THTDPCl) has been shown to be an effective extractant when incorporated in a PIM that uses cellulose triacetate (CTA) as a polymer. However, it has been reported that the use of a plasticizer is mandatory to ensure an effective transport, which uses both ultrapure water and a nitric acid solution as a stripping phase. A special device incorporating a PIM made of 50% CTA, 40% nitrophenyl octyl ether (as a plasticizer), and 10% THTDPCl, effectively allows the quantitative transport and preconcentration of 10 µg L−1 Cd from seawater samples to a stripping phase consisting of 0.5 M HNO3 solution. This study shows that the efficiency of the PIM system is not affected by high salinity nor the presence of large amounts of other ions, and can thus facilitate Cd monitoring in seawater samples