Pd and Pd-Cu supported on different carbon materials and immobilized as flow-through catalytic membranes for the chemical reduction of NO3, NO2-and BrO3- in drinking water treatment
Powdered catalysts are commonly used in lab-scale tests for the catalytic reduction of oxoanions in drinking water, but their powder nature limits their application at full scale. In this work, Pd and Pd-Cu catalysts (5% wt.) supported on carbon materials with different structural properties, in pow...
| Autores: | , , , , , , , |
|---|---|
| Tipo de recurso: | artículo |
| Fecha de publicación: | 2023 |
| País: | España |
| Institución: | Universidad Autónoma de Madrid |
| Repositorio: | Biblos-e Archivo. Repositorio Institucional de la UAM |
| Idioma: | inglés |
| OAI Identifier: | oai:repositorio.uam.es:10486/707201 |
| Acceso en línea: | http://hdl.handle.net/10486/707201 https://dx.doi.org/10.1016/j.jece.2023.109772 |
| Access Level: | acceso abierto |
| Palabra clave: | Carbon Catalytic membrane Flow-through configuration Oxoanion reduction Pd-Cu catalysts Química |
| Sumario: | Powdered catalysts are commonly used in lab-scale tests for the catalytic reduction of oxoanions in drinking water, but their powder nature limits their application at full scale. In this work, Pd and Pd-Cu catalysts (5% wt.) supported on carbon materials with different structural properties, in powder form, were used to prepare catalytic membranes that were tested in a reactor with flow-through configuration (FTCMR) to study their performance in the reduction of NO3-, NO2- and BrO3-. Pd catalytic membranes showed high activity in the reduction of NO2-, being the selectivity to NH4+ lower than 2% at 80% NO2- conversion in all cases. In BrO3- reduction, they exhibited a wide range of conversions being the catalyst supported on materials with high conductivity the most active ones, which may be ascribed to the charge distribution at the metal-carbon interface. NO3- reduction using Pd-Cu catalytic membranes showed that catalysts supported on materials with small nanoparticle size and low electrical conductivity exhibited higher selectivity to NH4+. FTCMR led to a good control of H2 transfer and availability in the active sites, facilitating the tuning of H2 availability conditions to preserve the activity, while maintaining/diminishing selectivity to NH4+. In simultaneous oxoanions reduction tests, NO3- reduction was inhibited by Br species, probably by affection of the Pd-Cu redox cycle. This fact could be crucial to the future development of drinking water treatment processes, as conditions the order of the disinfection and NO3- reduction steps |
|---|