Hydrogen Production through Oxidative Steam Reforming of Acetic Acid over Ni Catalysts Supported on Ceria-Based Materials
Oxidative steam reforming allows higher energy efficiency and lowers coke deposition compared to traditional steam reforming. In this work, CeO2-based supports have been prepared with Ni as the active phase, and they were tested in the oxidative steam reforming of acetic acid. The influence of the O...
| Autores: | , , , , |
|---|---|
| Tipo de recurso: | artículo |
| Fecha de publicación: | 2022 |
| País: | España |
| Institución: | Universidad Rey Juan Carlos |
| Repositorio: | BURJC-Digital. Repositorio Institucional de la Universidad Rey Juan Carlos |
| OAI Identifier: | oai:burjcdigital.urjc.es:10115/26817 |
| Acceso en línea: | https://hdl.handle.net/10115/26817 |
| Access Level: | acceso abierto |
| Palabra clave: | hydrogen production oxidative reforming catalysis SBA-15 mesoporous ceria nanocasting |
| Sumario: | Oxidative steam reforming allows higher energy efficiency and lowers coke deposition compared to traditional steam reforming. In this work, CeO2-based supports have been prepared with Ni as the active phase, and they were tested in the oxidative steam reforming of acetic acid. The influence of the O2/AcOH molar ratio (0–0.3) has been evaluated over Ni/CeO2. The results stated that by increasing oxygen content in the feeding mixture, acetic acid conversion increases too, with a decrease in coke deposition and hydrogen yield. To have a proper balance between the acetic acid conversion and the hydrogen yield, an O2/AcOH molar ratio of 0.075 was selected to study the catalytic performance of Ni catalysts over different supports: commercial CeO2, a novel mesostructured CeO2, and CeO2-SBA-15. Due to higher Ni dispersion over the support, the mesostructured catalysts allowed higher acetic acid conversion and hydrogen yield compared to the nonporous Ni/CeO2. The best catalytic performance and the lowest coke formation (120.6 mgcoke·gcat -1·h-1) were obtained with the mesostructured Ni/CeO2. This sample reached almost complete conversion (>97%) at 500 ºC, maintaining the hydrogen yield over 51.5% after 5 h TOS, being close to the predicted value by the thermodynamic equilibrium that is due to the synergistic coordination between Ni and CeO2 particles. |
|---|